LumberJocks

For the show

  • Advertise with us
Project by Monte Pittman posted 02-01-2014 01:33 PM 2011 views 1 time favorited 31 comments Add to Favorites Watch

Didn’t want everyone to think I am sitting around doing nothing. This week I was supposed to be at my biggest show of the year. However because of some setbacks I had to skip it. I do still have a couple smaller shows coming that I intend to be ready for.

This bar was built for display and is not finished in the back. If someone wants to buy it, I will finish it per the customer request. It’s beetle kill pine. It’s 6 ft wide, 3 ft deep and 42 inches high. Since I am always looking for improvement, comments are always welcome.

The body is finished with multiple coats of Polyurethane. The top is bar top epoxy.

Yes it was finished in my house. My finish room is still in the planning stage.

Thanks for reading

-- Mother Nature created it, I just assemble it.





31 comments so far

View nonickswood's profile

nonickswood

528 posts in 1781 days


#1 posted 02-01-2014 01:47 PM

That’s Gorgeous! Monte, Beautiful Job.

-- Nick, Virginia, http://www.etsy.com/shop/NONICKSWOOD

View gwolfe1977's profile

gwolfe1977

228 posts in 1205 days


#2 posted 02-01-2014 02:18 PM

Great job Monte! The finish on the top looks great! I’m glad to see you’re not letting your “setbacks” slow you down.

-- Gary,Nebraska

View doubleDD's profile

doubleDD

4991 posts in 1437 days


#3 posted 02-01-2014 02:39 PM

I think it’s ready for the show now. Add a couple optional stools with it and your off. Beautifully finished.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View david38's profile

david38

2318 posts in 1738 days


#4 posted 02-01-2014 02:39 PM

nice looking bar

View TZH's profile

TZH

524 posts in 2535 days


#5 posted 02-01-2014 03:03 PM

Now THAT’s nice! Love the contrast.

TZH

-- Where The Spirit In Wood Lives On

View whitebeast88's profile

whitebeast88

4083 posts in 1585 days


#6 posted 02-01-2014 03:06 PM

beautiful bar.glad your able to keep working.

-- Marty.Athens,AL

View AngieO's profile

AngieO

1245 posts in 1542 days


#7 posted 02-01-2014 03:08 PM

Looks great.

View Gene Howe's profile

Gene Howe

7977 posts in 2823 days


#8 posted 02-01-2014 03:32 PM

Very nice Marty. Glad that nothing like the mere loss of a shop can stop you.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View David Dean's profile

David Dean

604 posts in 2293 days


#9 posted 02-01-2014 03:40 PM

nice work and sorry about your shop.

View Bobsboxes's profile

Bobsboxes

1086 posts in 2058 days


#10 posted 02-01-2014 03:41 PM

Monte, very nicely done. You inspire us all, just remember, tough times don’t last, but tough people do.

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View LeTurbo's profile

LeTurbo

217 posts in 980 days


#11 posted 02-01-2014 03:49 PM

Can’t keep a good man down. Go Monte! Inspiring.

View longgone's profile

longgone

5688 posts in 2703 days


#12 posted 02-01-2014 03:49 PM

There is no doubt that you won’t any setbacks slow you down and stop your progress. Very nice bar…it should sell easily. Have you been accumulating tools or was this lumber that was already cut prior to the fire?

View BJODay's profile

BJODay

512 posts in 1337 days


#13 posted 02-01-2014 03:55 PM

Does the bar come stocked?

BJ

View Core2's profile

Core2

58 posts in 1000 days


#14 posted 02-01-2014 04:08 PM

Very Nice!

View Monte Pittman's profile

Monte Pittman

21258 posts in 1732 days


#15 posted 02-01-2014 04:10 PM

I have been doing both. I am searching for tools like a mad man. But I have 4 current projects that were started well before the fire. Just needs finishing.

-- Mother Nature created it, I just assemble it.

showing 1 through 15 of 31 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com