LumberJocks

Valentine's box

  • Advertise with us
Project by triviasteve posted 02-01-2014 04:28 AM 954 views 4 times favorited 5 comments Add to Favorites Watch
Valentine's box
Valentine's box No picture No picture No picture No picture No picture
Zoom Pictures

Another Steve Good inspired project. Box is red oak.

-- You know I'm on the level 'cause my bubble's in the middle.





5 comments so far

View jim65's profile

jim65

814 posts in 1401 days


#1 posted 02-01-2014 10:53 AM

Good looking box and 2 weeks ahead schedule!

-- Jim, Marostica Italy

View nitewalker41's profile

nitewalker41

448 posts in 2160 days


#2 posted 02-02-2014 02:53 AM

Really nice, someone well for sure be happy when they get it:-)

-- "older I get, the more fun I have"

View medsker's profile

medsker

124 posts in 2018 days


#3 posted 02-05-2014 03:53 AM

Is the llid done with a scroll saw? Where did you get the pattern. I like it, very clean and neat looking. Good work.

View triviasteve's profile

triviasteve

177 posts in 1168 days


#4 posted 02-05-2014 04:29 AM

Medsker,

Most of the box was done with the scroll saw. The lid pattern was cut with the scroll saw, and the walls were cut with the scroll saw as well. I also used my band saw and my miter saw to cut the top/bottom/sides to the right dimensions.

I got the pattern here: http://www.stevedgood.com/loveyou.pdf

I used a piece of 1/4 inch stock for the lid and bottom, then cut the box walls out of one piece of 1” thick oak. I cut a ring inside a ring, if that makes senseā€¦ the outer ring is the outer wall (the inner ring and outer ring are 1/4” thick). I used the inner ring to make a seat for the box lid to sit in. I took the inner ring to the band saw, and cut that to about 1/4”, and glued it to the lid bottom. It fits perfectly inside the outer ring.

Hope that make sense and hope that helps.

Steve Good has a lot of good patterns and they’re usually things you can make in just a few hours.

http://scrollsawworkshop.blogspot.com

I think he’s also a member here on LJ. so feel free to email him if you have any questions.

-- You know I'm on the level 'cause my bubble's in the middle.

View medsker's profile

medsker

124 posts in 2018 days


#5 posted 02-05-2014 03:25 PM

Triviasteve – Yes that makes sense! Thanks for the info and for pointing out Steve Good’s blog. Looks like lots of useful patterns and knowledge there. I’ve only done a couple scroll saw projects, but would like to try more sometime.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com