or Join Now!
12” turning saw, blade and brass blade pegs are from Gramercey. I made this out of European Beech. I put a piece of plastic tubing on the blade to protect the teeth and my skin.
-- Lumberdog.. Morley, Michigan
home | projects | blog
238 posts in 2772 days
Preview this project card
3228 posts in 3101 days
#1 posted 01-19-2014 10:54 PM
-- www.carvingandturningsbyrick.com, Rick Kruse, Grand Rapids, MI
450 posts in 2442 days
#2 posted 01-20-2014 02:22 AM
Doesen’t make it hard to cut with?:-) :-)
Love the details, do you relieve tension when not in use?
1617 posts in 1517 days
#3 posted 01-20-2014 02:36 AM
Nice work. I do like mine as well.
-- "My god has more wood than your god" ... G. Carlin.
#4 posted 01-20-2014 12:19 PM
I split the piece of plastic tubing so it snaps over the blade, i also store my extra blades this way. I also forgot to mention that the handles are turned from walnut. You will notice tool marks on the saw, i believe a tool made by hand should show a few marks after all it is just a tool.
263 posts in 1639 days
#5 posted 01-20-2014 05:07 PM
Nice work! I particularly like that you have made radiuses at the ends of the crossbar, and its intersection points on the frame. This makes the saw more stable in use. I also note you have ‘eased’ (rounded over) all the edges which makes any tool more pleasant to use, and has less risk of damaging your work. I highly approve!
Very nice craftsmanship.
-- Candy is dandy and rum sure is fun, but wood working is the best high for me!
289 posts in 2194 days
#6 posted 01-21-2014 04:59 PM
That is a stunning saw. I have been thinking about building one of these, but you give me pause—the bar is et too high!
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics