|Project by Steve||posted 01-15-2014 06:30 PM||2994 views||10 times favorited||7 comments|
This Tie Rack Hanger is made from 3/4” solid Cherry with 3/8” pine rods. The hanger has a grab handle and brass cup hooks on the sides for belts and suspenders. I only have five ties, so the four rods allow me plenty of room for more. It’s 15” wide and the sides are 11” long. The rods start at 1” down and are spaced 3” apart on center. Finished with Deft spray lacquer. I will no longer have to hang my ties awkwardly on a plastic hanger!
-- Steve in Lawrenceville, GA - http://www.TheCarmichaelWorkshop.com