Frame for raised relief map of Asheville, Pisgah National Forest, Smokies

  • Advertise with us
Project by Scott posted 01-13-2014 05:34 PM 8400 views 1 time favorited 6 comments Add to Favorites Watch

I built a frame for this raised relief map using some old pine with worm holes, and I added a 1/4 inch plywood back to support the map. I finished the frame with stain and shellac, then glued the map to the plywood using silicone caulk.

-- Scott in North Carolina

6 comments so far

View Toolz's profile


1004 posts in 3940 days

#1 posted 01-13-2014 07:28 PM

Great! I used to travel from FL every year to go trout fishing in the Pisgah National Forest ;-)

-- Larry "Work like a Captain but Play like a Pirate!"

View Scott 's profile


253 posts in 2465 days

#2 posted 01-13-2014 07:57 PM

Yes, it IS really beautiful there!

-- Scott in North Carolina

View Eddie_T's profile


208 posts in 2269 days

#3 posted 01-13-2014 08:55 PM

I need to do this. I have the same map which ends up in odd places when not being used.

View Scott 's profile


253 posts in 2465 days

#4 posted 01-13-2014 11:13 PM

Right it might do better with a permanent frame and place on the wall.

-- Scott in North Carolina

View GPCLT's profile


1 post in 236 days

#5 posted 04-18-2018 09:42 PM

Scott, i’m curious where you purchased the map for this project. Do you recall?

View Scott 's profile


253 posts in 2465 days

#6 posted 04-18-2018 10:18 PM

Just go here and you can click any of the maps in the USA, and order them. This particular one is called the Knoxville map but it shows all of Asheville and points west.

-- Scott in North Carolina

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics