LumberJocks

Cutting Board

  • Advertise with us
Project by davidmackv posted 01-09-2014 09:14 PM 760 views 2 times favorited 6 comments Add to Favorites Watch

Another cutting board. I am getting much better at getting them flat and equal on the lamination. This is very important to me, because I don’t have a planer and I have to sand them level by hand, if they are not level after lamination.





6 comments so far

View DavidATX's profile

DavidATX

25 posts in 1266 days


#1 posted 01-09-2014 11:51 PM

Hi David,
Nice looking board! What is the best way you have found to get it flat during the glue up?

View davidmackv's profile

davidmackv

317 posts in 1112 days


#2 posted 01-10-2014 12:09 AM

I make sure to cut the height of each board on the table saw at the same time at the same setting so they are all cut approximately the same height. Then I use cowls(sp) and clamp across the boards. For some reason even though I do this I still have one or two boards that are not exactly the same as the rest, but they get pretty close.

View gwolfe1977's profile

gwolfe1977

228 posts in 1275 days


#3 posted 01-10-2014 03:52 AM

Well you have definitely got it figured out. Nice looking board. I like the color and the grain pattern. Keep up the nice work.

-- Gary,Nebraska

View prospector45's profile

prospector45

150 posts in 1194 days


#4 posted 01-10-2014 04:14 AM

David, your attention to the details is evident in that your sanding to level is minimized because of the care in measurement of the pieces. Great job!! Each accomplishment just makes the future efforts better.

View davidmackv's profile

davidmackv

317 posts in 1112 days


#5 posted 01-11-2014 02:21 AM

Thanks, I just struggle with cutting all my pieces equal, because I have a crappy table saw. This is it LOL. Hopefully, I will get a better one someday.

View Fishinbo's profile

Fishinbo

11362 posts in 1640 days


#6 posted 01-14-2014 03:18 PM

Great looking board! Attractive wood colors and the great finish really made the grains pop. Great job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com