or Join Now!
This one turned out real nice. made of walnut and silver beech (false beech), glued with titebond II, finished with 2 coats of warm tung oil.
-- The woods are lovely, dark and deep, but I have promises to keep...
home | projects | blog
865 posts in 2930 days
Preview this project card
10949 posts in 3002 days
#1 posted 08-28-2008 01:27 AM
Very Nice! I really like the mellow color of the Beech.
-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.
5485 posts in 3324 days
#2 posted 08-28-2008 02:49 AM
i really like this…I may have to borrow this design…!!!
-- Matt--Proud LJ since 2007
1347 posts in 2910 days
#3 posted 08-28-2008 02:59 AM
Very nice board
-- Glenn, New Mexico
35021 posts in 3647 days
#4 posted 08-28-2008 03:04 AM
A great looking board. Not overpowering but very bold
-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia email@example.com †
8135 posts in 3014 days
#5 posted 08-28-2008 03:08 AM
Very cool design. Thanks for sharing.
-- My favorite piece is my last one, my best piece is my next one.
1164 posts in 3571 days
#6 posted 08-28-2008 05:07 AM
Sweet. At first I thought, `poor guy, look what happened to his chessboard.’ JKThat’s a design to be borrowed. ;-P
-- Gary, Florida. http://www.penturners.org/forum/f70/servicepens-2014-a-111967/
11796 posts in 2935 days
#7 posted 08-28-2008 05:08 AM
sweet board !! what size is it ?
-- I'm absolutely positive that I couldn't be more uncertain!
#8 posted 08-28-2008 05:19 AM
Thanks for all your comments. as for those who wish to borrow the design, its really simple. glue together strips of the same thickness and in the end glue one half width. as for the size, this one is quite small – 11”x9”. word of caution – sanding walnut endgrain is really tedious work.
64 posts in 2860 days
#9 posted 08-28-2008 06:13 AM
-- - Ray
257 posts in 2992 days
#10 posted 08-28-2008 10:20 AM
just finished my first cutting board from scrap. Not even as close to as nice as yours. Yours shows great attention to detail, Mine was just lots of cutting & I got bored . . .
#11 posted 08-28-2008 11:38 AM
the cutting is the easy part on this one, although (like any cutting board) it requires very precise cutting. the sanding, on the other hand, is the really exciting part! 80, 100, 120, 150, 180, 240, 320, 400, 600 grit
#12 posted 08-28-2008 01:09 PM
I admit it, I am a hack, a butcher a bodger and a cad. I went 80, 150, 220, oil, knife, dinner. I wasn’t happy with the layout, so I called it a prototype.
Yours has a 3D luminescence to it, assisted by the exacting layout.
I can’t stop staring at it . . .
508 posts in 3116 days
#13 posted 08-28-2008 04:25 PM
I can’t help to note that you said warm tung oil. Does that help it to absorb into the wood? And is tong oil exceptable to use on a cutting board? Nice project.
-- Dominic, Trinity, Florida...Lets be safe out there.
1918 posts in 2950 days
#14 posted 08-28-2008 09:34 PM
Thanks for the post
-- For wood working podcasts with a twist check out http://thetimberkid.com/
5809 posts in 2832 days
#15 posted 08-28-2008 09:36 PM
Far too good to cut meat and vegatables on! otherwise beautiful ! My eyes are going a bit squiggly.Alistair
-- excuse my typing as I have a form of parkinsons disease
View all comments »
showing 1 through 15 of 16 comments
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics