LumberJocks

Peirced Number 2

  • Advertise with us
Project by diggerdelaney posted 01-08-2014 09:01 PM 866 views 8 times favorited 14 comments Add to Favorites Watch

Well not being 100percent happy with the first piercing attempt thought I would try again. Made with American Black Walnut measures 6” along the edge 1 3/8” tall and the wings are 1/8” thick. The piercing is done with a dremel and finished with Danish Oil.
Sorry about photo quality

-- Derek, Kent, UK, http://s702.photobucket.com/albums/ww21/diggerdelaney/





14 comments so far

View meaded's profile

meaded

320 posts in 2609 days


#1 posted 01-08-2014 09:57 PM

Nice work I must try one

View Ronald G Campbell 's profile

Ronald G Campbell

676 posts in 906 days


#2 posted 01-08-2014 10:17 PM

Well done as this is not an easy turning to do.

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

View OhValleyWoodandWool's profile

OhValleyWoodandWool

969 posts in 2023 days


#3 posted 01-08-2014 11:38 PM

Way Cool

-- "All you need in this life is ignorance and confidence, and then Success is sure." Mark Twain

View oldnovice's profile

oldnovice

3962 posts in 2270 days


#4 posted 01-09-2014 03:52 AM

That must have been tough to turn but the results look like they were worth it.
Thank for sharing!

-- "I never met a board I didn't like!"

View Hawaiilad's profile

Hawaiilad

2380 posts in 1923 days


#5 posted 01-09-2014 04:48 AM

Very nice….if you turned that on the lathe, I would really like to know how you did it. I can also see using a scroll saw with a spiral blade with bowl upside down.

-- Larry in sunny and warm Hawaii,

View Woodbridge's profile

Woodbridge

3132 posts in 1320 days


#6 posted 01-09-2014 01:08 PM

beautiful and skilful work. That is a lovely looking piece.

-- Peter, Woodbridge, Ontario (peter.marcucci@rogers.com)

View diggerdelaney's profile

diggerdelaney

292 posts in 2652 days


#7 posted 01-09-2014 01:27 PM

Thank you all

Hawaiilad

Yes it was turned on the lathe after cutting out a triangle. Making sure you keep the fingers clear of the wings. Once all the turning was done I used the Dremel type multi tool to cut out the holes

-- Derek, Kent, UK, http://s702.photobucket.com/albums/ww21/diggerdelaney/

View Mip's profile

Mip

352 posts in 980 days


#8 posted 01-09-2014 05:38 PM

I’m going to try to attempt making this. Notice I said try to attempt here. That’s a lot of skill here, something I need more of. Nice looking bowl.

View BritBoxmaker's profile

BritBoxmaker

4511 posts in 1939 days


#9 posted 01-09-2014 06:29 PM

Looks good to me.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View tomd's profile

tomd

1872 posts in 2673 days


#10 posted 01-09-2014 07:55 PM

Very nice turning, quite unique design, great work especially the turning of the wings.

-- Tom D

View Brett's profile

Brett

907 posts in 1661 days


#11 posted 01-09-2014 09:30 PM

Very nice! You did good. I would like to try one of these now.

-- Hand Crafted by Brett Peterson John 3:16 http://www.TheCrookedNail.blogspot.com

View Kyle Hart's profile

Kyle Hart

66 posts in 810 days


#12 posted 01-10-2014 03:39 AM

Nicely made New World Order cereal bowl.

-- http://www.facebook.com/Hart.Construction.Fan?ref=hl

View OldWolfsWoodShop's profile

OldWolfsWoodShop

167 posts in 850 days


#13 posted 01-11-2014 04:37 AM

Very nice, I now know what my next project is.

-- Making Sawdust is great stress relief... www.oldwolfswoodshop.ca

View crowie's profile

crowie

793 posts in 853 days


#14 posted 01-12-2014 09:15 PM

Another very nice creation Derek…. You are becoming quite clever with these fancy turning projects, well done..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com