LumberJocks

Flag Case with Raised Base

  • Advertise with us
Project by WMD2006 posted 214 days ago 536 views 0 times favorited 4 comments Add to Favorites Watch

This was a fairly simple flag case built for a retiring USAF civilian built out walnut. The corners were mitered and assembled with #10 biscuits
Since I used the full widths of the boards, the top ended up being a little deep for the flag so I had to rout a two-stage recess from the back to make sure it would fit properly.
Additionally, the entire box is modular, a first for me. The base is attached with angled screws to the triangle, pocket holes, and straight screws from the bottom. The finish was a medium stain and spray lacquer.

-- -MDWhite





4 comments so far

View HillbillyShooter's profile

HillbillyShooter

4387 posts in 898 days


#1 posted 214 days ago

Nicely done—the base is a definite plus.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View hunter71's profile

hunter71

1964 posts in 1792 days


#2 posted 214 days ago

Great tribute.

-- A childs smile is payment enough.

View steve_in_ohio's profile

steve_in_ohio

1023 posts in 216 days


#3 posted 213 days ago

looks very nice, great work

-- steve, simple and effective woodworking---

View Roger's profile

Roger

14177 posts in 1410 days


#4 posted 212 days ago

Looks very nice

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase