LumberJocks Woodworking Forum banner

Project Information

I built this jig to carve wood with the router,
taking his cue from the video posted by a carpenter Russian.
The setting of the project seems to me good, however I'll still do some modifications, for example in support
steel in which and secured to the router. In order to better comprehend the
project I enclose the address of the the video.

Gallery

Comments

· Registered
Joined
·
19,753 Posts
This is a very ingenious jig ,great job. I'm very surprised at how many designs it can make.
 

· Registered
Joined
·
4,714 Posts
It sure is ingenious. I did not see the riser under the workpiece at first and could not see how the depth of cut was changing. At the end of the video the riser was evident and it became obvious as to the flexibility of the simple jig.
 

· Registered
Joined
·
100 Posts
Nice Mariva! really cool jig, I have been tempted to use the router for carving, will have to give it a try, Buon Anno!
 

· Registered
Joined
·
1 Posts
Interestingly this new jig you have built.
 

· Registered
Joined
·
4,714 Posts
I saw a router jig, in a old book by Spielman or Capotosto or DeCristoforo .. , that suspended the router at variable distances above the work. The motion of router could be totally free in all directions or limited in any number of directions.

It was intended to rough out chair seats and other carvings by locating the workpiece and swinging the router in one or more directions.
 

· Registered
Joined
·
122 Posts
New fresh ideas are always welcome in my shop.
 

· Registered
Joined
·
1,360 Posts
Brilliant, absolutely brilliant.
 
Top