Guitar Pick Box

  • Advertise with us
Project by RDR_82 posted 12-26-2013 05:54 PM 1541 views 4 times favorited 4 comments Add to Favorites Watch
Guitar Pick Box
Guitar Pick Box No picture No picture No picture No picture No picture
Zoom Pictures

I finally got around to making a couple of these over the holidays. I used curly maple for the body and cherry for the dowel. Pretty easy to make and open to variation. I got the idea and basic plans from Steve over at Woodworking for Mere Mortals. I followed Marc’s Pop Goes the Maple instructions for the finish…trans tint in shellac, then Seal-a-Cell.

4 comments so far

View rmoore's profile


325 posts in 2446 days

#1 posted 12-27-2013 02:07 AM

Love the maple. Did you not put in a magnet to keep it closed?

-- The more I learn, the more I realize I don't know. Ron, Crossville Tn

View RDR_82's profile


38 posts in 1958 days

#2 posted 12-27-2013 01:21 PM

No, I used a 3/16 inch dowel and hole, and glued the top to the dowel while letting the dowel spin freely in the body of the box. I attached a nut to the end of the dowel similar to the way Steve did for his box, I just opted to let the drag from the dowel in the hole be enough to keep the box from flying open. I just wanted to keep things more simple and clean.

View becikeja's profile


813 posts in 2624 days

#3 posted 12-27-2013 01:52 PM

that’s clever

-- Don't outsmart your common sense

View Fishinbo's profile


11362 posts in 1987 days

#4 posted 12-30-2013 03:03 PM

Beautiful box! The wood is gorgeous as well as the finish. Great work!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics