LumberJocks Woodworking Forum banner

Project Information

Sorry guys, I just don't know how to turn the pictures the right way!! So you'll have to tilt your heads a bit….

Anyway, got this idea from an LJ a few days ago…and decided to make one. I had a clock that was collecting dust in my drawer and I had some exotic woods just sitting there…..so I decided to create an heirloom..wink,wink….

Not sure where it's going but it will be in the living-room for now.

prez

Gallery

Comments

· Registered
Joined
·
4,567 Posts
Nice clock! Real pretty wood!!
................Jim
 

· Registered
Joined
·
1,456 Posts
That's a nice clock. To get the picture turned you just grab the bottom corner and lift (with your legs, never lift with your back.) Here it's started, a little more…


Almost there.


Too far! Too far! I thought you had that side.


Whew, that was close. Now it's fine. No, it's fine - just leave it alone before you break it.
 

Attachments

· Registered
Joined
·
64 Posts
Too funny…..!!!! Thanks JJ Yep…looks better that way!
 

· Registered
Joined
·
4,054 Posts
You'ld think that there would be a Portrait or Landscape setting on that camera / phone to orient photos correctly.
What woods and finish did you use on your clock ?
 

· Registered
Joined
·
64 Posts
Dusty…..zebra, teak, and birdseye maple….used tung oil for a finish.

prez
 

· Registered
Joined
·
1,558 Posts
G'day Prez, That's surely on very fine piece of timber you selected to make the clock.
The positioning of the clock at the top of the figure/grain pattern just sets it all off perfectly.
Well done sir..
 

· Registered
Joined
·
64 Posts
Thanks Crowie….and a G'day to you too….

prez
 

· Registered
Joined
·
19,753 Posts
Super looking clock Prez well done. Funny stuff Joe.
 
Top