LumberJocks

Demi-Lune Table

  • Advertise with us
Project by Dan Tindall posted 12-09-2013 09:08 PM 1147 views 2 times favorited 3 comments Add to Favorites Watch

This Demi-lune table was a modification of plans that I got from the Lowe’s Creative Ideas catalog.
Tools needed for this were my table saw, biscuit joiner, router, jig saw and sanders.
The legs were cut on the table saw using a Rockler taper jig.
The Top is two 3/4” x 12” x 30” boards edge joined to make the larger board to cut the top and shelf.





3 comments so far

View MarkTheFiddler's profile

MarkTheFiddler

2053 posts in 1653 days


#1 posted 12-09-2013 11:03 PM

Nice Job Dan. You did some outstanding work with your bending.

-- Thanks for all the lessons!

View Dan Tindall's profile

Dan Tindall

35 posts in 1094 days


#2 posted 12-09-2013 11:10 PM

Thanks. I cheated a bit on that front. I made the apron out of 3/4 plywood I had in the shop. Cut a bunch of kerfs in the plywood leaving a couple of veneer layers in tact. It came out pretty good.

View MarkTheFiddler's profile

MarkTheFiddler

2053 posts in 1653 days


#3 posted 12-10-2013 11:04 PM

Well sir, I appreciate the tip. Thanks a million!

-- Thanks for all the lessons!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com