|Project by GenuineGeek||posted 12-08-2013 08:15 PM||1100 views||0 times favorited||2 comments|
I did not take any pictures during the process, silly me.
The base or bottom is a 1 inch thick plywood with a veneer on the side facing up. Free turning wheels with locking mechanism are mounted to the four corners. Most of the slats are beech with some being maple when I ran short. I used a stain color called burgundy.
Dimensions. 2.5f long, 1.5f wide, and without wheels the box is 1f tall. I used 160 screws along with glue to hold it all together as it will be used as a child’s toy box and will suffer much abuse I am sure.
-- Don't try to figure it out... just turn it.