LumberJocks

Universal carts

  • Advertise with us
Project by Jeffups posted 221 days ago 912 views 4 times favorited 11 comments Add to Favorites Watch

This is a pair of carts a family member wanted after seeing my last project. He is going to donate to a pleasants forever organization. One is solid oak exterior, with drawers and a pull out shelf. The other is oak with walnut top, drawer fronts and trim. Both have caster wheels and wooden knobs that I made. Thanks for taking a look. Hope it inspires something for fellow LJs.

-- I have to remember this is a hobby..





11 comments so far

View Weth's profile

Weth

51 posts in 1183 days


#1 posted 221 days ago

Very nice carts. Too nice for the garage!

-- Weth

View Vagabond55's profile

Vagabond55

81 posts in 1843 days


#2 posted 221 days ago

No doubt, Your project motivates me to challenge.
Mobile cart is now my next project.
Thank you very much for sharing…..

View mloy365's profile

mloy365

429 posts in 1714 days


#3 posted 220 days ago

I am thinking of a new shop cart. You have given me some more to think about. Thanks 4 sharing.

-- Mike - Northern Upper Michigan

View BuzzBate's profile

BuzzBate

101 posts in 616 days


#4 posted 220 days ago

Being from Arkansas, I’m typically a fan of oak, but that walnut looks great!

-- "Drill as many holes as you want. We have plenty of putty."

View Belg1960's profile

Belg1960

777 posts in 1649 days


#5 posted 220 days ago

Both are nice but I agree with Buzz, the walnut is just stunning. I’m not familiar with the charity organization what are they know for?

-- ***Pat*** Rookie woodworker looking for an education!!!

View Jeffups's profile

Jeffups

58 posts in 426 days


#6 posted 220 days ago

Beig, Pheasants Forever is know for preserving wildlife habitat for future hunting. They usually do local chapter fundraising once a year.

-- I have to remember this is a hobby..

View Fishinbo's profile

Fishinbo

11210 posts in 760 days


#7 posted 217 days ago

Fantastic carts! Great design and build, like the handles. I’m sure they will last for a very long time. Excellent work!

View a1Jim's profile

a1Jim

111999 posts in 2161 days


#8 posted 217 days ago

Nice work.

-- http://artisticwoodstudio.com Custom furniture

View Belg1960's profile

Belg1960

777 posts in 1649 days


#9 posted 217 days ago

Thanks Jeff, sounds like a great cause. Could you share the steps you took to make the handles? They look too small to use a router on???

-- ***Pat*** Rookie woodworker looking for an education!!!

View helluvawreck's profile (online now)

helluvawreck

15252 posts in 1451 days


#10 posted 217 days ago

Nice work. You did a fine job on these.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Jeffups's profile

Jeffups

58 posts in 426 days


#11 posted 214 days ago

Beig1960 I used a 1” square pc about 5-6 long. And cut 1 pc in each end using router table & miter gauge. 1st bit 1/2 core box bit. Then 1/2 straight bit behind core area to make finger grab. Last I used 45* chamfer bit.

-- I have to remember this is a hobby..

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase