LumberJocks

Drill press table

  • Advertise with us
Project by MasterSergeant posted 244 days ago 2707 views 16 times favorited 11 comments Add to Favorites Watch

Last Christmas my kids gave me a drill press table kit from “Peachtree Woodworking Supply”. This week I put the kit together. The only problem I had was deciphering “engineer speak” in the instruction. Thank goodness for the quality picture that came with the kit.

I have used it a little and I see already it is going to be a very useful addition to my shop.

Thanks for looking, I alway enjoy looking at all the projects posted by my fellow Lumberjocks!

-- Kelly, woodworker under construction





11 comments so far

View BusterB's profile

BusterB

1335 posts in 605 days


#1 posted 244 days ago

Kelly, that thing is over the top….Nice addition to your shop…btw, we are lumberjocks….we dont need no silly instructions….rofl

-- Buster, Ocoee TN (Critics are men who watch a battle from a high place then come down and shoot the survivors - Hemingway)

View Marty Smoley's profile

Marty Smoley

156 posts in 316 days


#2 posted 244 days ago

That is some table. Very cool!

-- Marty, http://www.wickedpiggy.com

View MrNorwood's profile

MrNorwood

132 posts in 309 days


#3 posted 244 days ago

Is that a vac port I see on the right hand side? Well done sir.

-- Remember, Jesus was a carpenter.

View Rick's profile

Rick

6455 posts in 1630 days


#4 posted 244 days ago

Very Nice Work Indeed! Thanks For Sharing!

Rick

-- COMMON SENSE Is Like Deodorant. The People Who need It Most, Never Use It.

View Buche's profile

Buche

52 posts in 1546 days


#5 posted 243 days ago

It looks nice. But what is the vertical bit on the left side for?
Cheers

View Philip's profile

Philip

1076 posts in 1136 days


#6 posted 243 days ago

Looks great sir!

-- If you can dream it, I can do it!

View MasterSergeant's profile

MasterSergeant

1278 posts in 1285 days


#7 posted 243 days ago

The verticals side table will be used for large stock, edge, or end grain drilling that will not fit on the horizontal table. I’ll swivel the table to the side putting the verticals table in align with the chuck.

-- Kelly, woodworker under construction

View dnick's profile

dnick

892 posts in 979 days


#8 posted 243 days ago

That’s a great table. Well done.

-- dnick, North Hollywood, Ca.

View KOVA's profile

KOVA

1308 posts in 975 days


#9 posted 239 days ago

KELLY TE ESTÁS SOFISTICANDO Y ME PARECE
MUY BIEN :-)
ESA MESA ESTÁ GENIAL!!!!!!

-- KOVA, EL CARPINTERO DEL PUEBLO https://www.facebook.com/pages/El-Carpintero-Del-Pueblo/148976618479733

View MasterSergeant's profile

MasterSergeant

1278 posts in 1285 days


#10 posted 238 days ago

Gracias! este proyecto fue un buen reto para mí. Comencé con un kit de hardware y hoja de instrucciones, yo suministré la madera o MDF para éste.

-- Kelly, woodworker under construction

View WistysWoodWorkingWonders's profile

WistysWoodWorkingWonders

11908 posts in 1754 days


#11 posted 159 days ago

nice piece of kit you have there mate…

-- New Project = New Tool... it's just the way it is, don't fight it... :)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase