LumberJocks

Easel Jr.

  • Advertise with us
Project by Roger posted 234 days ago 1357 views 7 times favorited 33 comments Add to Favorites Watch

This is a “Jr” version of the 1st one. This is 13”x17”. This will fit the table a bit better, and when Kat is ready for a bigger canvas, she’s got “big-dog” (the 1st one), to handle much bigger canvas’. This is made with some left-over cutoffs from the crib, and a piece o 1/4” ply, then finished with a spray can of Krylon Clear. Thnx for the looks, and any comments, good/bad/ugly. Always appreciated.

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net





33 comments so far

View Monte Pittman's profile

Monte Pittman

12889 posts in 922 days


#1 posted 234 days ago

Very nice Roger

-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability

View Jim Jakosh's profile

Jim Jakosh

10951 posts in 1689 days


#2 posted 234 days ago

Nice easel’s Roger!! Very simple and effective!..........Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View jaykaypur's profile

jaykaypur

3219 posts in 992 days


#3 posted 234 days ago

You did a good job on these. My brother is a painter and I may just have to steal this idea.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View woodshaver's profile

woodshaver

2717 posts in 1936 days


#4 posted 234 days ago

Nice work Roger!

-- Tony C , My high school shop teacher said "You can do it"... Now I can't stop!

View HillbillyShooter's profile

HillbillyShooter

4260 posts in 876 days


#5 posted 234 days ago

Great easels and great job keeping the little lady happy! I can see these as great teaching aids for explaining to the fairer sex the need for tools—such as a large and a small router, a mini lathe and a full size lathe. The possibilities are endless, but I’m sure you already figured this out when you decided Kat needed a junior version of the easel. What’s the new tool you’re looking at? LOL

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Roger's profile

Roger

13946 posts in 1388 days


#6 posted 234 days ago

Thnx everybody. LOL-John;

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View gsimon's profile

gsimon

455 posts in 697 days


#7 posted 234 days ago

Great idea and use of the cut offs!

-- Greg Simon

View Chris Moellering's profile

Chris Moellering

224 posts in 1232 days


#8 posted 234 days ago

Ooh, I like it. Might fit better in daughter’s dorm room.

-- Grace & peace, Chris+

View lew's profile

lew

9915 posts in 2339 days


#9 posted 234 days ago

Really neat little “guy”, Roger.

Certainly keeping your bride stocked with the tools of her hobby.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View poospleasures's profile

poospleasures

289 posts in 1068 days


#10 posted 234 days ago

You just keep on thinking don’t ya. I know you just want keep her busy, right. Good job.

-- I love the smell of sawdust in the morning. Vernon

View LumberingWoodworker's profile

LumberingWoodworker

49 posts in 935 days


#11 posted 234 days ago

These look very usefull. Nice job!

View doubleDD's profile (online now)

doubleDD

2277 posts in 627 days


#12 posted 234 days ago

Good work Roger. My daughter has ideas of me making one for her. Looks like I have a project to do.

-- --Dave, Downers Grove, Il. When you run out of ideas, start building your dreams

View hunter71's profile

hunter71

1945 posts in 1770 days


#13 posted 234 days ago

looks like it works, good job.

-- A childs smile is payment enough.

View Joe Lyddon's profile

Joe Lyddon

7595 posts in 2636 days


#14 posted 234 days ago

That is very nice!

Sr. would be proud… LOL

COOL!

I was just thinking… (just a brain leak here)
Instead of using a Round rod for the Tilt Stopper, make it square just so it easily fits into the slots, and it’s Free Wheeling… Would be different from the common Round rod… and the wood could match…
Probably would stay Surer in the slot too and could NOT accidentally move to next slot.
—- end of brain leak—- LOL (just a thought)

Nice job / Project!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View Todd Barrone's profile

Todd Barrone

450 posts in 856 days


#15 posted 234 days ago

Neat idea sir. Excellent!

-- "Courage is being scared to death but saddling up anyway" John Wayne https://www.facebook.com/BarroneContracting

showing 1 through 15 of 33 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase