|Project by kiefer||posted 11-17-2013 09:40 PM||5045 views||38 times favorited||55 comments|
Well here is the first box I made from edge grain OSB ,see my previous post on this .
It worked out well all in all except for the hinges that I used which are just a little large for the wall thicknes .
The trim pieces are a mix from the scrap bin ,I was using this as experiment box just to see how it would work out and I am pleased with the result .
I did some filling on the OSB to achieve a little smother finish and than put a bees wax finish on after sanding to 150 grit .
My wife was good enough to make the liners and I put the wax finish on today and I call it done .
Size is 10”x6 1/2”x4 1/2” .
Let me know what you think ,good or bad .
-- Kiefer 松