|Project by GeneR||posted 11-16-2013 09:53 PM||2376 views||7 times favorited||6 comments|
This is the first one of these that i have tried to make and I am pretty sure this will be this years xmas presents that I send out. This is made from maple that has a little birdseye in it but not much as well as purple heart and some mesquite. The hole is 1 1/2 ” wide and the center of the hole is 6 5/8” from the bottom. I used a router table and chamfer bit to cut a sligt 45 degree angle on all edges. The bottom is also cut at 45 degrees. I finished it with natural watco danish oil.
I guess i can do simple in a pinch. :-)
Sorry it is not a big extravegant piece but I thought it came out all right for a quick project.
-- Failure is always an option. :-)