LumberJocks

Blade table

  • Advertise with us
Project by MrWill posted 11-11-2013 04:57 PM 1167 views 6 times favorited 4 comments Add to Favorites Watch

Here is a custom couch side table with an 8in table saw blade embedded in the surface. Table is made entirely of 3/4 in pine finished with min wax black stain wiped on let sit for 5 then wiped off. Sides are beveled at at 45 and also the legs on all four sides making octagon legs. Blade is held in place with a bar top style finish about 1/8 thick, bottom, legs and sides are sprayed with 3 coats tungoil/ poly blend





4 comments so far

View Jim Jakosh's profile

Jim Jakosh

17163 posts in 2570 days


#1 posted 11-12-2013 04:13 AM

Neat table. Very unique- made just for a woodworker!!!!!!!!!!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View MrWill's profile

MrWill

3 posts in 1122 days


#2 posted 11-12-2013 07:07 AM

Thanks appreciate the feedback

View MattObjects's profile

MattObjects

24 posts in 1841 days


#3 posted 11-16-2013 01:14 PM

Very cool. How did you keep the bar top finish from all running off over the sides?

View MrWill's profile

MrWill

3 posts in 1122 days


#4 posted 11-16-2013 08:09 PM

Thanks, I just poured it on and let it run off then took a foam brush and cleaned up the edges then let it tack up a bit and went back and brushed the edges again

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com