Project by AdrianM | posted 11-04-2013 02:15 AM | 2420 views | 1 time favorited | 5 comments | ![]() |
![]() |
Mallet Made on the CNC. I do not have a lathe and wanted to see if I could make a turning on the CNC without a 4th axis. Its a two step operation where you have to flip the workpiece.
All in all not bad – I did not center the walnut very well and the mallet seems too small and lightweight. I think next time a larger size.
I think it would be faster on a lathe.
Hickory and walnut finished with tried and true.
5 comments so far
Cedar Furniture Lodge
home | projects | blog
816 posts in 2236 days
#1 posted 11-04-2013 03:40 AM
That’s really cool, I would love to have a CNC machine. I think your right, a lathe might have been faster but a CNC is really cool.
-- "The Cedar King"
Tooch
home | projects | blog
1707 posts in 1840 days
#2 posted 11-04-2013 01:31 PM
nice work. how much sanding did you have to do?
-- "Well, the world needs ditch-diggers too..." - Judge Smails
AdrianM
home | projects | blog
105 posts in 2274 days
#3 posted 11-04-2013 03:39 PM
Step over was .015. So it came out very smooth. 5 min sanding.
Rick
home | projects | blog
9432 posts in 2997 days
#4 posted 11-05-2013 01:07 AM
Very Nice Project and Well Done! Thanks For Posting.
-- LIFE is what happens when you're planning on doing Other Things!
Fishinbo
home | projects | blog
11362 posts in 2139 days
#5 posted 11-07-2013 04:32 PM
Cool! It came out really good. Like the shape and the wood combo. Well done!
Have your say...