LumberJocks

Small Jewelry Box

  • Advertise with us
Project by Kerux2 posted 10-30-2013 01:33 AM 1271 views 3 times favorited 13 comments Add to Favorites Watch
Small Jewelry Box
Small Jewelry Box No picture No picture No picture No picture No picture
Zoom Pictures

Three sections made out of Spalted Walnut with a then Maple bottom. It is about 6 inch wide and around 2.75 inches high.

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.





13 comments so far

View Monte Pittman's profile

Monte Pittman

20621 posts in 1671 days


#1 posted 10-30-2013 01:41 AM

Very cool

-- Mother Nature created it, I just assemble it.

View Kerux2's profile

Kerux2

223 posts in 1065 days


#2 posted 10-30-2013 02:55 AM

Thanks Monte!

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.

View Ken90712's profile

Ken90712

16731 posts in 2522 days


#3 posted 10-30-2013 07:57 AM

Very nice, cool shape.

-- Ken, "Everyday above ground is a good day!"

View Hawaiilad's profile

Hawaiilad

2845 posts in 2354 days


#4 posted 10-30-2013 09:10 AM

Nice looking box…did you cut it on the bandsaw? Seems a bit thick to cut on the scroll saw

-- Larry in Hawaii,

View ward63's profile

ward63

344 posts in 2420 days


#5 posted 10-30-2013 02:27 PM

Nice box! Great idea for some scrap wood.
Thanks for sharing.

View Kerux2's profile

Kerux2

223 posts in 1065 days


#6 posted 10-30-2013 03:35 PM

Thanks Ken.

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.

View Kerux2's profile

Kerux2

223 posts in 1065 days


#7 posted 10-30-2013 03:37 PM

Hawaiilad, Well, it was done on the scrollsaw. I have a Hawk G…. I took it to the very limit.

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.

View Kerux2's profile

Kerux2

223 posts in 1065 days


#8 posted 10-30-2013 03:37 PM

Thanks Ward, I like that it had some spalting. Gives it a little extra character.

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.

View Kerux2's profile

Kerux2

223 posts in 1065 days


#9 posted 10-30-2013 03:48 PM

Hawiilad, Just thinking that the thickness includes the top and the bottom piece. so you take that away and it’s about 2” thick where I scrolled out the sections.

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.

View aussiedave's profile

aussiedave

3114 posts in 1157 days


#10 posted 10-30-2013 04:40 PM

very cool looking jewelry box…spalted walnut and the maple look great…well done.

-- Dave.......If at first you don’t succeed redefine success....

View Hawaiilad's profile

Hawaiilad

2845 posts in 2354 days


#11 posted 10-30-2013 08:35 PM

2” cut on the scroll saw is really pushing it, but you sure did a great job. Was the wood pretty hard or soft?

-- Larry in Hawaii,

View majuvla's profile

majuvla

7982 posts in 2200 days


#12 posted 10-31-2013 07:13 AM

Beautiful and unique shape,nice box.

-- Ivan, Croatia, Wooddicted

View Kerux2's profile

Kerux2

223 posts in 1065 days


#13 posted 10-31-2013 03:14 PM

Hawaiilad, yea, both… softer in the sapwood area and hard toward the heart of the wood.

-- Hey I'm Dyslexic! I don't have all day to check and re-check forum post.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com