or Join Now!
This is a chair I built from a combination of two by four’s and one by four’s (hence the title). It’s a great beginner project as it can all be done with a circular saw and a driill.
Oct 22, 2013
home | projects | blog
66 posts in 1024 days
Preview this project card
202 posts in 1086 days
#1 posted 10-22-2013 03:21 PM
Where did you get the idea for this? I wanna try my hand at a few of these!
#2 posted 10-22-2013 03:41 PM
I came across the idea at http://2x4chair.com/You can buy the plans there.
3096 posts in 1291 days
#3 posted 10-22-2013 05:55 PM
great looking chair. the 2×4s and 1×4s cleaned up nicely and you’ve added a very nice finish. The wood plugs add a nice detail that bring the look above and beyond a construction lumber built chair. great idea.
-- Peter, Woodbridge, Ontario (firstname.lastname@example.org)
51 posts in 1931 days
#4 posted 10-22-2013 08:23 PM
You built a very nice chair Oliver. I would not have cut out the seat slats for the tops of the front legs to come through, but you followed the original design and that is a matter of style and not your work which looks very good.
234 posts in 1121 days
#5 posted 10-23-2013 03:02 AM
I love those! That is the type of materials I have laying around. Real nice.
727 posts in 587 days
#6 posted 10-23-2013 09:32 AM
Looks great! Would look even greater on my porch: Would love a few more images showing the construction beneath and at the back- perhaps wit some basic measurements.
-- "Do or Do not. There is no try." - Yoda
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics