LumberJocks

Coins Box

  • Advertise with us
Project by woodworm posted 2179 days ago 2473 views 3 times favorited 23 comments Add to Favorites Watch
Coins Box
Coins Box No picture No picture No picture No picture No picture
Zoom Pictures

The first small box I built from “nyatoh” wood.
Box side and tradiitional foot bits : EagleAmerica
Stains
1. Box lid & foot : walnut
2. Box : red mahagony
Sealer : shellac
Top Coat : lacquer

-- masrol, kuala lumpur, MY.





23 comments so far

View woodworm's profile

woodworm

14124 posts in 2186 days


#1 posted 2179 days ago

I am almost definite to buy TS2500ci Scheppach Table Saw.
The cast iron table bed/table top is not “mirror finished” ground as found in most table saws in the market (so far as I’d seen in the advertisement).
Does it really matters?
Your comment please.

-- masrol, kuala lumpur, MY.

View Chris 's profile

Chris

1867 posts in 2586 days


#2 posted 2179 days ago

1st: Is the table ground flat within a couple of thousandth’s across the surface? Is so then you good.

2nd: If the non-mirror finish to the top does not cause a extra friction as a piece of lumber slides across the top I still don’t see an issue.

Looks like it has a sliding table and dust collection built into the guard; also Very nice to have.

-- "Everything that is great and inspiring is created by the individual who labors in freedom" -- Albert Einstein

View motthunter's profile

motthunter

2141 posts in 2394 days


#3 posted 2179 days ago

I do not know this saw. What you look for is smooth and friction free. Also a surface that will remain as it starts with little or no maintenance. A painted surface would be great if the paint didnt eventually come off.. It is about low friction and long wear.

Can you see one in person to test it out?

When I purchased my saw and jointer from Grizzly years ago, I asked for references in my area then called them to get the low down. I found a guy 10 miles from home and went to his shop to check both out. Not only did I get to see one up close and hear from a guy who uses his daily, I made a new friend.

If the company has no references, I would be weary.

-- making sawdust....

View OutPutter's profile

OutPutter

1194 posts in 2585 days


#4 posted 2179 days ago

I think this should have been posted in one of the forums or something. Maybe a blog to follow the process of picking out a saw and setting it up, etc. Nevertheless, I wish you luck and a friction free future.

-- Jim

View Dusty56's profile

Dusty56

11638 posts in 2283 days


#5 posted 2179 days ago

“Attached picture for members to review”
Picture is too small and out of focus to really ” review” anything about the saw….This really isn’t a project and probably should be posted in the forums section . Have a great day : )

-- I'm absolutely positive that I couldn't be more uncertain!

View Dusty56's profile

Dusty56

11638 posts in 2283 days


#6 posted 2178 days ago

well I like this box much better than the saw picture you had posted here earlier : ) Any more shots of the box to post ?

-- I'm absolutely positive that I couldn't be more uncertain!

View Callum Kendall's profile

Callum Kendall

1918 posts in 2298 days


#7 posted 2176 days ago

Great job!

Thanks for the post

Callum

-- For wood working podcasts with a twist check out http://thetimberkid.com/

View jeanmarc's profile

jeanmarc

1886 posts in 2311 days


#8 posted 2169 days ago

Great job!

-- jeanmarc manosque france

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2268 days


#9 posted 2090 days ago

Nice looking Box.

-- CJIII Future cabinetmaker

View woodworm's profile

woodworm

14124 posts in 2186 days


#10 posted 2090 days ago

Tank you Jeanmarc, Beginningwoodworker and everyone for viewing this post and your kind words.
Take care and work safe.

-- masrol, kuala lumpur, MY.

View woodhawk's profile

woodhawk

4 posts in 2079 days


#11 posted 2078 days ago

A beautiful specimen. I particularly like the foot detail.

-- Peace and kangaroo grease

View woodworm's profile

woodworm

14124 posts in 2186 days


#12 posted 2078 days ago

Thanks Woodhawk for the compliments!

-- masrol, kuala lumpur, MY.

View Smile's profile

Smile

3 posts in 2078 days


#13 posted 2078 days ago

splendid job~~~i would like to learn````

View woodworm's profile

woodworm

14124 posts in 2186 days


#14 posted 2078 days ago

Thank you Smile,
......as always you like to make other people smile.

Have a good night…

-- masrol, kuala lumpur, MY.

View SnowyRiver's profile

SnowyRiver

51451 posts in 2076 days


#15 posted 2073 days ago

Great looking coin box. Excellent job! The color is gorgeous.

-- Wayne - Plymouth MN

showing 1 through 15 of 23 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase