|Project by Curtis Z||posted 10-17-2013 01:42 AM||1049 views||0 times favorited||2 comments|
So.. this is the first and only large item I’ve tried to make. Learned a lot.. especially what not to use for case construction. The Out laws wanted it “cheap”.. oh well.
Top is end grain maple.. I do have some concerns related to its holding up over the years due to the thickness. Time will tell. The middle drawer on the bottom conceals a pullout garbage can. Forget to get another pic after the door and drawer hardware was installed unfortunately.
My wood working is so far limited to a few cutting boards, so really, the hobby begins from here.
Also, replaced their under the counter pull out cutting board. I found out their original was plywood. Yes. That looked amazing after years of cutting on…...