LumberJocks

Tavern Mirror

  • Advertise with us
Project by Anthony posted 10-16-2013 03:56 AM 1799 views 5 times favorited 11 comments Add to Favorites Watch

I built this Tavern Mirror to go in my office at work.

It was a great chance to use my Beadlock jig to make the floating mortise and tenon joints. I also experimented with glass etching to add the “Anthony’s Place” on the mirror.

It is a great place to hang my jackets and everyone that comes into my office automatically check themselves out in the mirror.

-- Anthony - "The blacksmith and the artist, reflect it in their art. They forge their creativity, closer to the heart"





11 comments so far

View Gary's profile

Gary

9353 posts in 3582 days


#1 posted 10-16-2013 09:11 AM

That’s pretty sharp. That etching really adds to the project. I’d like to try that sometime.
Nice work

-- Gary, DeKalb Texas only 4 miles from the mill

View Ken90712's profile

Ken90712

17575 posts in 3338 days


#2 posted 10-16-2013 09:24 AM

Great work, I have one like this in our house as well. Love the looks of this…. Well done.

-- Ken, "Everyday above ground is a good day!"

View Monte Pittman's profile

Monte Pittman

29880 posts in 2488 days


#3 posted 10-16-2013 09:33 AM

Very nice work. Very clean and tight.

-- Nature created it, I just assemble it.

View stefang's profile

stefang

15953 posts in 3484 days


#4 posted 10-16-2013 10:05 AM

Good work and a nice office addition.

-- Mike, an American living in Norway.

View GerardoArg1's profile

GerardoArg1

985 posts in 2143 days


#5 posted 10-16-2013 12:21 PM

Nice job. looks great. Beatiful joints.

-- Disfruta tu trabajo (enjoy your work) (Bandera, Argentina)

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 2442 days


#6 posted 10-16-2013 12:27 PM

Great looking piece for your office, and great way to show of your wood working skills.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View jm82435's profile

jm82435

1285 posts in 3892 days


#7 posted 10-16-2013 02:59 PM

I like it. like the Rush reference also. Did you use a chemical or mechanical etch?

-- A thing of beauty is a joy forever...

View Anthony's profile

Anthony

125 posts in 1862 days


#8 posted 10-16-2013 03:21 PM

Thank you all for the great comments, I love the support that Lumberjocks offers from fellow woodworkers.

JM82435, I used a chemical etching, it is called Armour Etch and can be found at most hobby stores. It was my first time doing it and it was really easy, but you do need to make sure that there are no open areas where the etching material can sneak through, I got a few tiny bleed throughs but they are not very noticable unless you are right in front of it and looking closely.

-- Anthony - "The blacksmith and the artist, reflect it in their art. They forge their creativity, closer to the heart"

View Lee A. Jesberger's profile

Lee A. Jesberger

6864 posts in 4129 days


#9 posted 10-16-2013 03:25 PM

Great job.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View helluvawreck's profile

helluvawreck

32083 posts in 3016 days


#10 posted 10-16-2013 04:04 PM

This is very attractive. Nice work.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View aussiedave's profile

aussiedave

3114 posts in 1974 days


#11 posted 10-16-2013 11:37 PM

Great looking Tavern Mirror, you did a great job. Thanks for sharing.

-- Dave.......If at first you don’t succeed redefine success....

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com