|Project by Jerry||posted 09-18-2013 01:33 PM||1856 views||2 times favorited||4 comments|
My first set was a painting disaster. Had to read up on paint do’s and DON’TS. Turns out I had the “don’ts” down pretty well….... and it showed. This time the paint went on and stayed on much better. I used a Kreg pocket hole jig so there are no visible holes to fill and construction of the boards takes less than 45 minutes from material to a regulation board. Painting, that’s another story. However, it was much better this time. I bought vinyl HD logos and the rest is taping and painting.
Thanks for looking,
-- Jerry - Rochester, MN *Whether you think you can or you can't, you are probably right* - Henry Ford