take a stab at what this is?? Whats your best guess?

  • Advertise with us
Project by indplswoodworking posted 09-12-2013 12:29 AM 2675 views 2 times favorited 35 comments Add to Favorites Watch
take a stab at what this is?? Whats your best guess?
take a stab at what this is?? Whats your best guess? No picture No picture No picture No picture No picture
Zoom Pictures

I have been working on this for several days? Whats your best guess on what this is? I will have some updated photos in a couple days!! The cabinet is made from 1/2in plywood and the top is made from several pieces on Poplar edge glued. I also slightly tapered the three sides of the tip for some additional detail and placed a 45deg chamfer for a subtle detai;.


35 comments so far

View TurnTurnTurn's profile


614 posts in 3254 days

#1 posted 09-12-2013 01:28 AM

how about a TV stand???

-- TurnTurnTurn

View MarkTheFiddler's profile


2068 posts in 2334 days

#2 posted 09-12-2013 03:07 AM

Nice job on your end table. ;)

-- Thanks for all the lessons!

View Jacob Fuhrer's profile

Jacob Fuhrer

16 posts in 1868 days

#3 posted 09-12-2013 03:43 AM


View Woodknack's profile


12369 posts in 2525 days

#4 posted 09-12-2013 03:52 AM

It’s a stand, maybe for a tv, maybe a stereo, maybe a planer … it is a mystery!

-- Rick M,

View Cater's profile


14 posts in 1866 days

#5 posted 09-12-2013 04:11 AM

I do not like this game, but nice work…

-- Reclaimed Wood blog

View John Milleker's profile

John Milleker

12 posts in 1865 days

#6 posted 09-12-2013 04:36 AM

Looks a little small..

Ham Cozy?

-- John Milleker, Photographer in Baltimore Maryland -

View Kristoffer's profile


675 posts in 3361 days

#7 posted 09-12-2013 05:33 AM

I’m with Jacob….. I think it’s wood.

-- Cheers and God Bless

View robscastle's profile


5313 posts in 2349 days

#8 posted 09-12-2013 06:14 AM

I think its a table and a very nice one as well!

-- Regards Rob

View mds2's profile


310 posts in 2089 days

#9 posted 09-12-2013 01:00 PM

Is it a racecar? Do you know what it is?

View smitty22's profile


714 posts in 3092 days

#10 posted 09-12-2013 03:39 PM

Nicely done whatever it is. Just don’t screw it up with doors or drawers!

Could it be that you built it without a clue what it was going to be?
Or maybe a real short bookcase?

-- Smitty

View TonyCat's profile


5 posts in 2053 days

#11 posted 09-12-2013 03:58 PM

I’m gonna take a real wild guess and say it’s that cleaning machine in the making from the cat in the hat.
I thinks its called a “Dynamic Industrial Renovating Tractormajigger”
Very nice work!

View TonyCat's profile


5 posts in 2053 days

#12 posted 09-12-2013 04:07 PM

My wife wants me to make her one about table height to set next to the kitchen island for making bread.
The kitchen counter is to high for kneading dough.
Did you use pocket holes and screws to assemble the face frame?

View mastersus's profile


13 posts in 1889 days

#13 posted 09-12-2013 04:12 PM

I’m with smitty, I think you’ve built it, don’t know what it is and are fishing for a tag to label it with, but I’ve seen one before, if it’s musical that is, go on giz-a-clue.

-- AL, frae bonny Scotland

View Grumpymike's profile


2310 posts in 2460 days

#14 posted 09-12-2013 04:36 PM

An end table to put next to your chair for all your Woodworking magazines?
It’s kind of like placing a photo of a 24 inch piece of 2X4 and asking “What do you think I will make out of this”???

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View Bogeyguy's profile


548 posts in 2213 days

#15 posted 09-12-2013 04:54 PM

Looks like a sittin stole.

-- Art, Pittsburgh.

showing 1 through 15 of 35 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics