Tri-fold display board

  • Advertise with us
Project by Scott posted 09-09-2013 10:26 PM 25440 views 2 times favorited 4 comments Add to Favorites Watch

This is a tri-fold display board which is made from 1/4 inch plywood, plus some 1/2 inch backing strips to keep the boards straight. Plus 4 hinges, danish oil and some string to tie it closed. 36 inches tall by 48 inches wide. A quick little project.

-- Scott in North Carolina

4 comments so far

View Jim Jakosh's profile

Jim Jakosh

21534 posts in 3280 days

#1 posted 09-16-2013 01:51 PM

Nice project, Scott!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View sarahmontes's profile


1 post in 1523 days

#2 posted 09-16-2014 08:58 PM

hi we are a team for ftc can u help as make this

View Scott 's profile


253 posts in 2442 days

#3 posted 09-16-2014 11:30 PM

You just need half a sheet of 1/4” plywood, 4 foot by 4 foot. Cut it into 1 piece that is 3 foot x 2 foot. Cut two pieces that are 3 foot x 1 foot. You need six 1/2” thick wood strips, any width but about 1.5 to 2 inches should work, and they are 3 feet long. Just glue them to the back of the plywood. Then just attach 4 hinges to the strips.

-- Scott in North Carolina

View Chinkygirl11's profile


1 post in 1137 days

#4 posted 10-08-2015 02:03 AM

where can i get this?

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics