LumberJocks

End Grain with Diamonds.....

  • Advertise with us
Project by JL7 posted 09-06-2013 09:40 PM 2489 views 20 times favorited 34 comments Add to Favorites Watch

Yes, another end grain cutting board…...

Hard Maple, Cherry, Walnut and Padauk. Kind of a tricky glue up as the two ends had to glued up as individual blocks. But the corners all matched up pretty well.

The perimeter inlay is Birdseye Maple scraps.

Thanks for looking…

-- Jeff - I have not failed. I've just found 10,002 ways that won't work.





34 comments so far

View Dallas's profile

Dallas

3400 posts in 1335 days


#1 posted 09-06-2013 09:44 PM

Beautiful work! I may have to try this when I get back into the shop this fall.

-- Improvise.... Adapt...... Overcome!

View DIYaholic's profile

DIYaholic

16026 posts in 1522 days


#2 posted 09-06-2013 10:08 PM

It’s official….
You are the Chairman, err Craftsman of the Board!!!

I must say, or type, this is my favorite!!!
VERY well done.

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View ShaneA's profile

ShaneA

5594 posts in 1446 days


#3 posted 09-06-2013 10:34 PM

Another nice project Jeff. You got the skillz, and the stash….that is a winning combination.

View Mainiac Matt 's profile

Mainiac Matt

4919 posts in 1176 days


#4 posted 09-06-2013 11:20 PM

The joints on that board are amazingly tight Jeff…. Super nice outcome!

-- Pine is fine, but Oak's no joke!

View Dave's profile

Dave

11218 posts in 1687 days


#5 posted 09-06-2013 11:46 PM

I wouldn’t want to cut on it.
Nice work Jeff.

-- Superdav "No matter where you go - there you are." http://chiselandforge.com

View Gene Howe's profile

Gene Howe

6463 posts in 2276 days


#6 posted 09-06-2013 11:46 PM

Great looking board, Jeff.
As Randy said, you are the board craftsman!

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View SPalm's profile

SPalm

5067 posts in 2729 days


#7 posted 09-06-2013 11:59 PM

Now you’re getting fancy.
That is a real keeper.

Very well done Sir,
Steve

-- -- I'm no rocket surgeon

View fernandoindia's profile

fernandoindia

1079 posts in 1791 days


#8 posted 09-07-2013 12:01 AM

that’s beautiful Jeff.

I guess you spent more time planning the grain direction, than cutting & gluing.

very nice design,I like it.

Maple scraps? Did you already ran out of maple? Cant believe it

Take care

-- Back home. Fernando

View JL7's profile

JL7

7723 posts in 1812 days


#9 posted 09-07-2013 12:30 AM

Thanks for all the comments guys, appreciate it…...and Fernando, there is always a little Maple left….always!

-- Jeff - I have not failed. I've just found 10,002 ways that won't work.

View PatrickB's profile

PatrickB

38 posts in 1795 days


#10 posted 09-07-2013 12:43 AM

You guys amaze me. Nice work!!

-- Really? Really? How important is it?

View a1Jim's profile

a1Jim

113162 posts in 2424 days


#11 posted 09-07-2013 12:47 AM

Beautiful

-- http://artisticwoodstudio.com Custom furniture

View MShort's profile

MShort

1744 posts in 2266 days


#12 posted 09-07-2013 12:48 AM

Excellent pattern. Another one for my favs list.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View Mathew Nedeljko's profile

Mathew Nedeljko

666 posts in 2677 days


#13 posted 09-07-2013 02:36 AM

Great board Jeff, amazing end grain matching…did you carve your logo?

-- Aim high. Ride easy. Trust God. Neale Donald Walsch

View MarkTheFiddler's profile

MarkTheFiddler

1938 posts in 1036 days


#14 posted 09-07-2013 04:44 AM

WOW! Outstanding and elegant. You outdid yourself!

-- Thanks for all the lessons!

View deon's profile

deon

2297 posts in 1873 days


#15 posted 09-07-2013 04:55 AM

Great work!

-- Dreaming patterns

showing 1 through 15 of 34 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com