Step-Up for toddler: a few firsts for me

  • Advertise with us
Project by Kwit posted 09-06-2013 01:03 AM 1848 views 8 times favorited 13 comments Add to Favorites Watch

I built this for my best-man’s daughter who is turning 1 year old

For me it is my first mortise/tenon work – my first “displayed” dovetail joint – and my first time working with walnut

-- don't talk about it - be about it

13 comments so far

View EggMan's profile


70 posts in 1710 days

#1 posted 09-06-2013 01:31 AM

Looks great. Did you do the dovetails and MT work by hand?

View Kwit's profile


103 posts in 1894 days

#2 posted 09-06-2013 02:45 AM

Thanks Eggman

However – my skill level is only at the point of router and jig work

-- don't talk about it - be about it

View A.Scott's profile


230 posts in 1912 days

#3 posted 09-06-2013 03:51 AM

Nice work!

View nuttree's profile


280 posts in 3259 days

#4 posted 09-06-2013 04:52 AM

Nothing wrong with router and jig work – nice job.

-- I only went out for a walk and finally concluded to stay out till sundown, for going out, I found, was really going in. -John Muir

View a1Jim's profile


117032 posts in 3512 days

#5 posted 09-06-2013 05:08 AM

Nice step stool.

-- wood crafting & classes

View Ken90712's profile


17553 posts in 3124 days

#6 posted 09-06-2013 08:28 AM

Well done and nice joints!

-- Ken, "Everyday above ground is a good day!"

View Roger's profile


20916 posts in 2739 days

#7 posted 09-06-2013 11:15 AM

1st time….........looks professional to me. Nice build

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View workerinwood's profile


2717 posts in 3003 days

#8 posted 09-06-2013 01:04 PM

Well done, looks great!!

-- Jack, Albuquerque

View Lanaug's profile


188 posts in 2144 days

#9 posted 09-06-2013 02:12 PM

it looks like there is one through MT and the other not? Was there a reason? Am I missing something. It looks great, nice dovetails!

View travislucia's profile


43 posts in 1689 days

#10 posted 09-06-2013 05:24 PM

This looks great, I’d like to use this same design to hold my dogs food and water bowl haha.

-- Measure Once, Cut Once, Be Unique

View CFrye's profile


10073 posts in 1775 days

#11 posted 09-06-2013 05:30 PM

Beautifully well done and finished Kwit! She’ll get many years of use out of that. Thanks for sharing!

-- God bless, Candy

View Kwit's profile


103 posts in 1894 days

#12 posted 09-06-2013 08:53 PM

Lanaug – The MT blends in too well on the other side – it’s hard to see in the picture – but it’s there

Travislucia – Funny you say that – my first design used oak and no angles on the legs – didn’t come out to well – so I made a dog food and water stand out of it

Thanks for the compliments everyone

-- don't talk about it - be about it

View camps764's profile


867 posts in 2295 days

#13 posted 09-07-2013 12:42 AM

this is great! Added to my ‘to do’ list.

-- Steve

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics