LumberJocks

Tenon Saw

  • Advertise with us
Project by Nugs posted 332 days ago 807 views 0 times favorited 4 comments Add to Favorites Watch

Finished building my tenon saw kit, I ordered this to have a crosscut saw to accompany my rip dovetail saw kit. My first attempt ended up as firewood, when i tried to cut the seating I cut it crooked so the blade wasn’t square to the handle and to top it off the handle wasn’t big enough for three bolts.

I started fresh and this time things went alot better. I made it out of bulletwood and finished it with shellac. I have a small crack that I filled with super glue, so we’ll see how that holds up. This saw cuts very well, I cut a piece of 4/4 maple with it and a small piece of mahogany for a box.





4 comments so far

View TurnTurnTurn's profile

TurnTurnTurn

585 posts in 1715 days


#1 posted 332 days ago

Very nice!!!

-- TurnTurnTurn

View HillbillyShooter's profile

HillbillyShooter

4387 posts in 898 days


#2 posted 331 days ago

Very nicely done—nice handle details.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Ken90712's profile

Ken90712

14848 posts in 1794 days


#3 posted 331 days ago

well done!

-- Ken, "Everyday above ground is a good day!"

View Benvolio's profile

Benvolio

132 posts in 537 days


#4 posted 330 days ago

looks great. where was your kit from?

-- Ben, England.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase