|Project by EggMan||posted 09-02-2013 05:14 PM||1046 views||0 times favorited||2 comments|
So I made a simple spline jig
Then I needed to build something using the jig.
I made this little box, it is poplar and has splines made of padauk.
Same as another box I made, I would like the wall thicknes thinner. A planer is the tool that I am looking for next.
The padauk bled red color onto the poplar during glue up and I had to sand quite a bit to remove it, but it turned out all right and the spline jig was a success.
Finished with poly.