Lazy Susan/serving tivets

  • Advertise with us
Project by LoydMoore posted 08-29-2013 12:31 AM 1967 views 3 times favorited 14 comments Add to Favorites Watch

The 3D design was a learning project. It measures 11” and is made from Walnut, Cherry and Maple with a Hickory inlay.

I did learn a lot.
1. I need better control when cutting the angles
2. Any error is magnified the further you get from the center
3. Heavy duty rubber bands hurt like heck when they pop

On the next try I will make the individual hexagons smaller.

The larger lazy susan is 16” and made from Walnut and Maple with a Hickory inlay.

-- Loyd, San Angelo, TX

14 comments so far

View kdc68's profile


2689 posts in 2421 days

#1 posted 08-29-2013 12:49 AM

Wow…A beautiful outcome from your learning experiences…well done!

-- Measure "at least" twice and cut once

View GaryD's profile


623 posts in 3514 days

#2 posted 08-29-2013 01:14 AM

Looks good from here

-- Gary, Little River,SC I've Learned that the Lord didn't do it all in one day and neither can I

View cutworm's profile


1075 posts in 2938 days

#3 posted 08-29-2013 01:18 AM

Absolutely awesome!

-- Steve - "Never Give Up"

View don1960's profile


227 posts in 2831 days

#4 posted 08-29-2013 01:39 AM

I think what you learned is that you’re one heck of a woodworker. Beautiful.

-- -- Don from PA

View Jim Jakosh's profile

Jim Jakosh

21296 posts in 3250 days

#5 posted 08-29-2013 03:00 AM

Outstanding pieces!!!!!!!!!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View BobWemm's profile


2534 posts in 2070 days

#6 posted 08-29-2013 04:44 AM

If I could achieve that result with a “Learning” experience, I would be extremely happy.
Congratulations and well done.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View lumberdustjohn's profile


1263 posts in 3311 days

#7 posted 08-29-2013 12:22 PM

Nice work. Thanks for posting

-- Safety first because someone needs you.

View Joe Weaver's profile

Joe Weaver

518 posts in 3831 days

#8 posted 08-29-2013 12:33 PM

very nice

-- Joe, Ga

View freddyaudiophile's profile


58 posts in 2195 days

#9 posted 08-29-2013 12:59 PM

Truly exceptional work. What did you use on these for a finish?

-- freddyaudiophile, Fredericton, NB, Canada

View LoydMoore's profile


105 posts in 2101 days

#10 posted 08-29-2013 02:10 PM

Boiled Linseed Oil

2 coats Danish Oil

5 coats wipe on poly

spit polished with Menzerna yellow compound and diluted Dawn dish soap.

Takes three days but actual labor is only about 30 minuted

-- Loyd, San Angelo, TX

View Ronald G Campbell 's profile

Ronald G Campbell

981 posts in 2149 days

#11 posted 08-29-2013 11:00 PM

Very well done.

-- Ron Campbell

View JJones98042's profile


228 posts in 2397 days

#12 posted 08-30-2013 09:52 AM

Spectacular projects! Well done!

-- "Keep thy airspeed up, lest the earth come from below and smite thee." - William Kershner

View Fishinbo's profile


11362 posts in 2320 days

#13 posted 09-03-2013 03:35 PM

Both look amazing! Like the beautiful patterns and wood combo and the finish set it off. Great job!

View Leroy5's profile


88 posts in 3196 days

#14 posted 12-26-2014 03:20 AM

Very nice!

-- Leroy

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics