LumberJocks

A Cut Above

  • Advertise with us
Project by Macster posted 370 days ago 1618 views 5 times favorited 15 comments Add to Favorites Watch

Not much to say about it…its a cutting board :). Up until now, everything that i have made has had some size to it..I wanted to do something that was a bit smaller, I have also heard that you aren’t a true woodworker until you have made a cutting board. I guess I have made it :).

It made from Maple and Mahogany. 4 coats of Mineral Oil. I used 3/4” rubber feet on the bottom so it won’t slide around. All in all I think it turned out pretty good for my first cutting board (second if you count the one I messed up, oh well).

Thanks for looking! How often do you think I will need to re-apply oil to it?

-- "Still Learning"





15 comments so far

View David's profile

David

196 posts in 1300 days


#1 posted 370 days ago

Looks great, nice work. I re-oil mine about once a year, or whenever it looks like it needs it.

-- Perilous to all of us are the devices of an art deeper than we ourselves possess. --Gandalf the Grey http://davidwahl.org/category/woodworking/

View Macster's profile

Macster

80 posts in 767 days


#2 posted 370 days ago

I guess “as it looks like it needs it” is the most consistent answer I have found. That’s what I’ll go with :) thanks!

-- "Still Learning"

View Devin123456's profile

Devin123456

7 posts in 370 days


#3 posted 370 days ago

Cool

View jeff_wenz's profile

jeff_wenz

124 posts in 2187 days


#4 posted 370 days ago

What are the dimensions? Can you post a picture of the 3/4” rubber feet? Are they adhesive based or screwed in?

-- Jeff, North Carolina

View Macster's profile

Macster

80 posts in 767 days


#5 posted 370 days ago

dimenstions are 10×13. The feet screw in. Here is a picture of the feet.

-- "Still Learning"

View freddyaudiophile's profile

freddyaudiophile

58 posts in 687 days


#6 posted 370 days ago

Very nice board!!

I use rubber feet from Lee Valley… They are clear and stick on, but I follow them in with a #10×3/4” stainless steel screw.

-- freddyaudiophile, Fredericton, NB, Canada

View Macster's profile

Macster

80 posts in 767 days


#7 posted 370 days ago

I figured they wouldnt be seen anyway so I just went with what the local hardware store had.

-- "Still Learning"

View bazz135uk's profile

bazz135uk

346 posts in 488 days


#8 posted 369 days ago

Great looking board well done nice design Looks really well made. Great combination of timbers.

-- BAZZ, WINDSOR UK A workshop is not a luxury . We need it to preserve our sanity in this frantic world we live in. A place to be at peace.

View Macster's profile

Macster

80 posts in 767 days


#9 posted 369 days ago

Thanks! I was actually fortunate enough to get the stock for free!

-- "Still Learning"

View Dusty56's profile

Dusty56

11644 posts in 2324 days


#10 posted 369 days ago

What kind of Mahogany did you use ?

-- I'm absolutely positive that I couldn't be more uncertain!

View Macster's profile

Macster

80 posts in 767 days


#11 posted 369 days ago

umm… :) not sure…it was a cut off scrap from a friends’ dad’s cabinet shop.

-- "Still Learning"

View Dusty56's profile

Dusty56

11644 posts in 2324 days


#12 posted 369 days ago

The view from “down under” looks like possibly Ipe to me, that’s why I asked : )
Nice looking board.

-- I'm absolutely positive that I couldn't be more uncertain!

View amagineer's profile

amagineer

1384 posts in 1233 days


#13 posted 369 days ago

Nice CB. I tend to agree with Dusty, it looks like IPE. All the mahogany I have seen did not have that much of a grain pattern, but who is to say it is not american mahogany.
-don

-- Flaws are only in the eye of the artisan!

View majuvla's profile

majuvla

3345 posts in 1504 days


#14 posted 369 days ago

No bad words for this. It’s pretty good.

-- Ivan, Croatia, Wooddicted

View Jose A.Berenguer's profile

Jose A.Berenguer

32 posts in 771 days


#15 posted 368 days ago

very nice indeed. Congratulations.

-- In fine furniture 10% of the work, takes 90% of the time. www.berenguerfurniture.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase