 |
Cast Iron Coffee Mill Mechanisms and Coffee Mill Well Kits, with FREE Downloadable Plan! | Makita Makita Recon LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Pc Kit |
| Project by FritzM | posted 486 days ago | 574 views | 2 times favorited | 4 comments |  |
 |
Dimensions: 33”H x 29”W x 4”D (at shelf)
Wood: Quarter-Sawn Walnut
Finish: 3 Coats – General Finishes, Arm-R-Seal, satin
Simple mitered mirror frame with 80 degree tapers on the side and top rails. 3” deep shelf. Joined with domino’s and attached to wall with a 3/8” French cleat.
-- Fritz Oakland, Ca http://www.muegenburg.com (dedicated to my other hobby)
©2005-2008 LumberJocks.com. All Rights Reserved.
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
| Latest Projects | Latest Blog Entries | Latest Forum Topics 
|
Latest Projects | Latest Blog Entries | Latest Forum Topics 
|
4 comments so far
EternalDesign
home | projects | blog
141 posts in 889 days
posted 486 days ago
nice and clean looks really good fritz.
-- Brian, Eternal Furniture & Design http://www.eternal-furniture.com Repurpose Reclaim,Stay Green
trifern
home | projects | blog
7894 posts in 661 days
posted 486 days ago
Great looking mirror. You sure can’t find anything like this in the stores. Thank you for sharing.
-- My favorite piece is my last one, my best piece is my next one.
gizmodyne
home | projects | blog
1674 posts in 984 days
posted 486 days ago
Well done. I need to make one of these.
-- -John "Do I have to keep typing a smiley? Just assume it's a joke." www.flickr.com/photos/gizmodyne
thetimberkid
home | projects | blog
1944 posts in 597 days
posted 485 days ago
Great job!
Thanks for the post
Callum
-- For wood working podcasts with a twist check out http://thetimberkid.com/