LumberJocks

More french style rolling pins

  • Advertise with us
Project by GenuineGeek posted 08-25-2013 08:36 PM 2196 views 11 times favorited 11 comments Add to Favorites Watch

Rolling pins made from scrap wood I had. Mostly maple, and walnut. The yellow is not dyed or tinted, that is true Yellow Heart.
All were finished with Watco brand “Butcher Block Finish”, it is a hard glossy food safe finish that has pretty much no maintence (no need to regularly put new mineral oil on to keep it good).

-- Don't try to figure it out... just turn it.





11 comments so far

View dozuki's profile

dozuki

103 posts in 2364 days


#1 posted 08-25-2013 08:58 PM

Those are great. I don’t think I could keep it flat enough to make a good rolling pin. Very cool

-- Couldn't think of anything clever. I LIKE WOOD

View Dallas's profile

Dallas

3599 posts in 1850 days


#2 posted 08-25-2013 10:34 PM

Beautiful!

-- Improvise.... Adapt...... Overcome!

View Shawn Masterson's profile

Shawn Masterson

1292 posts in 1311 days


#3 posted 08-25-2013 10:42 PM

is this what you got??? It looks like it goes on like polly. can you give me some insight to the finish.

View GenuineGeek's profile

GenuineGeek

157 posts in 1344 days


#4 posted 08-25-2013 10:49 PM

Yes, that is the finish Shawn. It works wonderfully. Be very careful to seal the container very well as it will start to skin over and become troublesome to keep well otherwise.
I apply it with a light cotton rag – like a rag made from an old t-shirt.
I put on light coats and rub it down with 0000 steel-wool between coats. It starts looking very good at about the 4th coat.

-- Don't try to figure it out... just turn it.

View lew's profile

lew

11175 posts in 3118 days


#5 posted 08-25-2013 10:51 PM

Those are some beauties!!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Woodbridge's profile

Woodbridge

3436 posts in 1781 days


#6 posted 08-25-2013 11:14 PM

great looking rolling pins. I like the cool designs.

-- Peter, Woodbridge, Ontario

View Margerydb1's profile

Margerydb1

74 posts in 1840 days


#7 posted 08-26-2013 12:46 AM

Beautiful

-- Margery

View Sandra's profile

Sandra

6900 posts in 1438 days


#8 posted 08-26-2013 10:06 AM

Very nice! I’ve never tried using one for pastry, but have always admired them.
How heavy are they?

-- No, I don't want to buy the pink hammer.

View GenuineGeek's profile

GenuineGeek

157 posts in 1344 days


#9 posted 08-26-2013 06:47 PM

I just weighed one and it was exactly 1lb. Some are larger and weigh a bit more, or some are made from a heavier wood. . .

-- Don't try to figure it out... just turn it.

View woodsmithshop's profile

woodsmithshop

1241 posts in 2908 days


#10 posted 08-26-2013 08:14 PM

great looking pins, I like some of your design ideas. I have been wanting to try the wider pieces.

-- Smitty!!!

View Sandra's profile

Sandra

6900 posts in 1438 days


#11 posted 08-28-2013 10:48 AM

Thanks GG. Good to know.

-- No, I don't want to buy the pink hammer.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com