LumberJocks

Cherry Secretary rollup desk.

  • Advertise with us
Project by Jose A.Berenguer posted 08-24-2013 01:36 AM 2912 views 4 times favorited 17 comments Add to Favorites Watch

Cherry secretary I made for my wife’s birthday.

-- In fine furniture 10% of the work, takes 90% of the time. www.berenguerfurniture.com





17 comments so far

View MShort's profile

MShort

1776 posts in 2877 days


#1 posted 08-24-2013 01:53 AM

That is a beautiful desk. You wife should love it.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 1751 days


#2 posted 08-24-2013 01:55 AM

Very, very nicely done! Your wife has to be one happy lady.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View LoganN's profile

LoganN

326 posts in 1360 days


#3 posted 08-24-2013 02:35 AM

Wow! Fantastic job! Thats a lot of hard work there for sure!

View Oldtool's profile

Oldtool

2373 posts in 1650 days


#4 posted 08-24-2013 03:30 AM

Beautiful. Great work, I’m sure your wife loves it.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View aussiedave's profile

aussiedave

3114 posts in 1283 days


#5 posted 08-24-2013 10:36 AM

Really really nice Secretary…you did an awesome job.

-- Dave.......If at first you don’t succeed redefine success....

View CL810's profile

CL810

3440 posts in 2447 days


#6 posted 08-24-2013 07:32 PM

Well done.

-- "The only limits to our realization of tomorrow will be our doubts of today." - FDR

View gsimon's profile

gsimon

1192 posts in 1572 days


#7 posted 08-24-2013 11:54 PM

wonderful job

-- Greg Simon

View wood4evr's profile

wood4evr

2 posts in 1246 days


#8 posted 08-25-2013 01:13 AM

Did u make this with plans or not….what are the width measurement..would love to build one but need to make sure itwill fit…

View tinnman65's profile

tinnman65

1297 posts in 2873 days


#9 posted 08-25-2013 01:54 AM

Very nice work, nice idea putting some accents on the front roll up.

-- Paul--- Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep. — Scott Adams

View Jose A.Berenguer's profile

Jose A.Berenguer

32 posts in 1594 days


#10 posted 08-25-2013 02:15 AM

Thank you everyone for your kind comments. This is my own design and it is 33” wide 21” deep and 52” tall (30” to the top of stand).

I bought the Lonnie Bird tambour making router bit set. The tambour slats are 1/2” thick and don’t require canvas or wires, it is made like a round tenon and socket. The minnimun radius is 3”.

I think my wife will use with her laptop computer and a printer on the bottom shelf. The lower drawer has a top that is flash with the drawer top to place the computer and has storage underneath.

Here is a link of the set I bought. http://www.toolstoday.com/p-5916-tambour-doorappliance-garage-router-bit-set-by-lonnie-bird.aspx

I got mine on ebay new for $150 including shiping.
It is very easy to make if you have a nice router table. (I used the Grizzly model wich is nice and was only $119 as a presidents special.) Good luck

-- In fine furniture 10% of the work, takes 90% of the time. www.berenguerfurniture.com

View rebel13's profile

rebel13

34 posts in 1353 days


#11 posted 08-27-2013 02:21 PM

beautiful desk….Absolutely Beautiful…..........

-- Rick

View helluvawreck's profile (online now)

helluvawreck

23109 posts in 2326 days


#12 posted 08-27-2013 03:54 PM

This is a real nice piece and very well done.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View nonickswood's profile

nonickswood

534 posts in 1846 days


#13 posted 08-28-2013 01:30 AM

Excellent ! fits right in with all your other projects.
Beautiful work!!

-- Nick, Virginia, http://www.etsy.com/shop/NONICKSWOOD

View Fishinbo's profile

Fishinbo

11362 posts in 1635 days


#14 posted 08-28-2013 02:15 PM

Wow! That’s one gorgeous desk! Great design and execution. Very lucky wife!

View robbie20's profile

robbie20

9 posts in 1692 days


#15 posted 08-28-2013 05:24 PM

First and foremost, amazing piece of work! I am in the process of building my first desk; I used Cherry and was wondering how you happened to finish your project.

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com