or Join Now!
Put 2 pieces of 2×4 plywood together and made a 8’ x 2’ piece. Used a couple hinges, painted it to order. Done
home | projects | blog
127 posts in 1015 days
Preview this project card
16534 posts in 2436 days
#1 posted 08-23-2013 09:47 AM
Many fun nights playing Beer Pong…. Well… I think they were,,, LOL
-- Ken, "Everyday above ground is a good day!"
#2 posted 08-23-2013 03:36 PM
540 posts in 1547 days
#3 posted 08-23-2013 03:56 PM
-- Measure twice, cut once, then rout a whole bunch
2270 posts in 1196 days
#4 posted 08-23-2013 11:14 PM
Looks good Paula, what do you use for legs? Or do you make the table to sit on top of another table/surface? I made a few that folded like that but I always had problems with the legs and the middle wanting to sag, ended up with an extra folding wood leg in the middle, but I was never really happy with it.
-- Chain Hang To My Ding-A-Ling --
19003 posts in 2052 days
#5 posted 08-23-2013 11:43 PM
Ok, where’s the main part…........ beer… ? lol
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com
#6 posted 08-24-2013 06:23 PM
well this one is hinged and for on top of a picknick table, i usually get a set of folding legs from home depot for about 20 bucks. anchor then to a couple of 1×4 then mount the pong table on, no problems with sagging middle because i put a frame under it about 1/2 the size on each side of the table itself
#7 posted 08-26-2013 10:43 PM
Yeah I usually go with the home depot ones too, HF sells them as well but they are only a couple dollars cheaper than HD so I usually go for the HD ones.
Do you add poly or lacquer after you paint the tops?
I do the same with the legs though, build a 1”x2” frame around the underside, then put either scrap 1”x or 2×4’s to mount the legs to. They are tanks, the legs would break before the table. I also started recessing the triangle down about 1.5” for play in windy conditions!
#8 posted 08-27-2013 11:27 PM
yea i poly them, and sounds like we do them about the same way. never play them, but friends pay me to make them so i will enjoy them for now.. lol yours look really good too.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics