LumberJocks

Yet another Celtic knot cutting board.

  • Advertise with us
Project by Mrmyke posted 08-22-2013 11:44 PM 2740 views 21 times favorited 18 comments Add to Favorites Watch

Hey guys I was asked to make another Celtic knot. This is my last one ill build although I did happen to find a more challenging knot from a comment on degoose page. Which is the one in the photo library. I have already dimensioned up some wood to build it. So I plan to get a start on it tomorrow after I get off work.

Anyways this board was made from walnut, maple, and ash. It measures 18 1/8” x 18 1/8” and 7/8 thick with x 5 non skid pads as always on the bottom.

Thanks for checking It out.

-- mike





18 comments so far

View kdc68's profile (online now)

kdc68

2068 posts in 1020 days


#1 posted 08-23-2013 01:22 AM

Cool looking cutting board….well done….

-- Measure "at least" twice and cut once

View deon's profile

deon

2238 posts in 1769 days


#2 posted 08-23-2013 02:21 AM

Very cool yes

-- Dreaming patterns

View Dave777's profile

Dave777

264 posts in 2813 days


#3 posted 08-23-2013 08:41 AM

I would be tied in knots trying to make that….. well done
Dave

-- the stone rejected by the builders will become the capstone

View Ken90712's profile

Ken90712

15303 posts in 1932 days


#4 posted 08-23-2013 09:55 AM

Wow a real beauty! Look fwd to seeing more….

-- Ken, "Everyday above ground is a good day!"

View Mrmyke's profile

Mrmyke

41 posts in 772 days


#5 posted 08-23-2013 11:15 AM

Thanks guys. I do expect a few headaches and a few mess ups on the next generation knot. Should be a learning experience no matter what though

-- mike

View MarkTheFiddler's profile

MarkTheFiddler

1907 posts in 932 days


#6 posted 08-23-2013 12:41 PM

Beautiful cutting board. Now I’ve got to see the rest of your projects. Thanks for the inspiration!

-- Thanks for all the lessons!

View PurpLev's profile

PurpLev

8476 posts in 2392 days


#7 posted 08-23-2013 12:45 PM

very nice

-- ㊍ When in doubt - There is no doubt - Go the safer route.

View a1Jim's profile

a1Jim

112805 posts in 2321 days


#8 posted 08-23-2013 01:08 PM

Super job extra nice looking board.

-- http://artisticwoodstudio.com Custom furniture

View Mrmyke's profile

Mrmyke

41 posts in 772 days


#9 posted 08-23-2013 02:26 PM

Thanks guys. The board I’m starting tonight (2nd picture) should be good learning experience and a few headaches. Hopefully it turns out ok

-- mike

View MarkTheFiddler's profile

MarkTheFiddler

1907 posts in 932 days


#10 posted 08-23-2013 02:34 PM

Mike,

I had to comment again. I can’t wait to see your next offering. I like the next design you picked out. I’m inspired to try my own.

-- Thanks for all the lessons!

View aussiedave's profile

aussiedave

3014 posts in 568 days


#11 posted 08-23-2013 04:21 PM

Wow great looking cutting board….excellent design…. It looks too good to use as a cutting board.
Excellent job.

-- Dave.......Keep calm and make more sawdust....

View amagineer's profile

amagineer

1392 posts in 1340 days


#12 posted 08-23-2013 04:36 PM

Nice grains and 3D effect. Can’t wait to see the next one.
-don

-- Flaws are only in the eye of the artisan!

View AC2013's profile

AC2013

8 posts in 494 days


#13 posted 08-23-2013 04:42 PM

Nice contrast with the walnut and ash. I like the way you worked the maple in to give the over and under weaving effect that Celtic knots have. Amazing job!

-- AC2013, Pepperell, MA USA, http://performancepowertoolsreviews.com

View bannerpond1's profile

bannerpond1

276 posts in 642 days


#14 posted 08-23-2013 05:41 PM

That’s exquisite! Try it in end grain.

-- --Dale Page

View Mrmyke's profile

Mrmyke

41 posts in 772 days


#15 posted 08-23-2013 05:59 PM

I would like to but i just don’t have enough time. Maybe someday I will do one end grain. There would also be a lot of waste doing it end grain losing an 1/8” with each cut???

-- mike

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase