LumberJocks

Omega Psi Phi Fraternity Shield -18"

  • Advertise with us
Project by Jerome posted 334 days ago 1054 views 0 times favorited 4 comments Add to Favorites Watch

This is a 18” version of the shield that i make out of pine plywood. the top layer (letters, star, and lamp) are Baltic Birch. This is my 11th shield made.

This project came from a special request to have one made with no paint or stains. This was especially difficult because any tearout , nicks, or mishaps would have deteriorated the overall beauty. It was finsihed with the coat of poly.

I also added a few pictures of a painted version of the 18” shield

-- Jerome, Marietta, GA





4 comments so far

View stefang's profile

stefang

12519 posts in 1929 days


#1 posted 334 days ago

Another nice one. Great for a den or library.

-- Mike, an American living in Norway.

View Jerome's profile

Jerome

83 posts in 724 days


#2 posted 334 days ago

Thanks! Right, I think it would fit nicely in a library or office.

-- Jerome, Marietta, GA

View Jerome's profile

Jerome

83 posts in 724 days


#3 posted 334 days ago

Also, the half spheres were the first that were cut using my “ball splitting jig”

-- Jerome, Marietta, GA

View CalgaryGeoff's profile

CalgaryGeoff

936 posts in 1077 days


#4 posted 334 days ago

The shields are very neat looking projects. I sure like the little and fine detail that you have obviously paid close attention to as they all show excellence. Cheers.

-- If you believe you can or can not do a thing, you are correct.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase