| Project by woodnot | posted 1765 days ago | 1288 views | 0 times favorited | 6 comments |  |
 |
I have had the top and backer in storae under the bed for almost three years. And now that I have a shop up and running, it’s time to move forward with this coffee table.
I am torn between using black walnut or padouck for the table base. A local sawyer sold me some 2 1/4”x12”x 10’ padouk, so cabriole legs are a real possibility! ! ! And he bought a 10’ 4×4 black walnut. DECISIONS- DECIDIONS ! ! ! ! !
I also threw in a couple shop photos. and yes that is a harley (trusted stead) between the table saw and router table.
-- NW wood worker
| Pin It |
6 comments so far
Dusty56
home | projects | blog
10541 posts in 1860 days
#1 posted 1765 days ago
The top looks like it will be fantastic when finished .
-- When did quiet and quite become the same word ? I'm guessing about the same time as your and you're did.
griff
home | projects | blog
1202 posts in 1934 days
#2 posted 1765 days ago
Looks like it will be great
-- Mike, Bruce Mississippi = Jack of many trades master of none
daveintexas
home | projects | blog
365 posts in 2048 days
#3 posted 1765 days ago
I like your choice of veneer, very nice layout.
Are you going to wrap the edges with solid wood??
If so, I would vote for the walnut. Padauk is very pretty when it is first cut, but then when the UV rays get done with it, it has a muddy brown color. At least to me it does.
Also, it depends on what type of finish you are going to use.
I just veneered up a panel that was a 4 part walnut burl, I framed it with Karlian birch veneer that was two inches wide, and then wrapped the edges with 2 inch wide walnut. And since it will get a clear finish i will make the base out of walnut.
HTH
Lets see some pics of the finished table when done.
TXTHUNDER
jockmike2
home | projects | blog
10636 posts in 2418 days
#4 posted 1765 days ago
Good luck, sounds like some beautiful wood you’ll be working with.
-- (You just have to please the man in the Mirror) Mike from Michigan -
crosseyedcarver
home | projects | blog
224 posts in 1209 days
#5 posted 1201 days ago
Can’t wait to see the final pics.
-- Tim, Tallahasse FL
a1Jim
home | projects | blog
87330 posts in 1749 days
#6 posted 1201 days ago
Looks like a great start.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Have your say...