LumberJocks

Miter Sled

  • Advertise with us
Project by Todd Barrone posted 08-13-2013 11:14 PM 1798 views 0 times favorited 6 comments Add to Favorites Watch

Well I won the west lake ace hardware DIY project of the month for July, they sent me a $300.00 gift card for my prize. So I went & bought me a new table saw that I really needed. Well my old miter sled would not work, so we built a new one. Yes of course I made it out of cedar & it appears to work great. Can’t wait to make some picture frames.

-- "The Cedar King" https://www.facebook.com/BarroneFarm





6 comments so far

View BusterB's profile

BusterB

1921 posts in 1472 days


#1 posted 08-14-2013 12:40 AM

Oh yes, you will be turning out the best smelling miters in the neighborhood….NICE. One of the items that every shop should have bud. Your wife get mad when you told her you were gonna keep that new tablesaw in the bedroom??? Thats pretty sweet Todd…congratulations.

-- Buster, Ocoee TN (Critics are men who watch a battle from a high place then come down and shoot the survivors - Hemingway)

View paxorion's profile

paxorion

1102 posts in 1509 days


#2 posted 08-14-2013 01:29 AM

Is that a Craftsman Evolv table saw? It looks like the miter slots aren’t the standard 3/8×3/4 measurement. What did you use for the runners?

-- paxorion

View whitebeast88's profile

whitebeast88

4092 posts in 1654 days


#3 posted 08-14-2013 02:01 AM

thats the prettiest sled i’ve seen!!!!!

congrats on the new tablesaw!!!

-- Marty.Athens,AL

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 1756 days


#4 posted 08-14-2013 03:58 PM

Nicely done and I’ll bet that is the best smelling sled on LJs! Congratulations on the new TS—use it well and enjoy.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View Roger's profile

Roger

19868 posts in 2268 days


#5 posted 08-17-2013 12:48 AM

Verrrrrry nice.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View Jacob Fuhrer's profile

Jacob Fuhrer

16 posts in 1187 days


#6 posted 09-26-2013 02:08 PM

I have a question about your table saw. How good of quality cuts do you get out of that. I had recently bought the same one and when i was cutting datos, i dont have a dato blades so i just made one cut then moved it over a little until it was the right width, but all my cuts were at different depths. Also when i was cutting a 2×6, i cut a little more than half way through then flipped it over to cut the rest and i found that my cuts wernt perfectly aligned. So i just wanted to know if you had any similar problems at first and if you did anyting to correct them.

Thanks, Jacob

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com