LumberJocks

Circles Anyone? Cutting deadly accurate and repeatable circles with "shop made jig"!

  • Advertise with us
Project by Izzy Swan posted 354 days ago 4012 views 28 times favorited 14 comments Add to Favorites Watch

Cut very accurate and repeatable circlers with fun and easy to build shop made jig! Check out the video link to see just how this easy it is to build and use! So much fun you might just want to cut circles for no reason at all… lol
https://www.youtube.com/watch?v=AFFX0JGFUfU&feature=youtube_gdata_player

-- Izzy Swan - A Creative Thinkers approach to Woodworking





14 comments so far

View HillbillyShooter's profile

HillbillyShooter

4386 posts in 898 days


#1 posted 354 days ago

Another very nice jig—thanks for the post.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View steliart's profile

steliart

1807 posts in 1294 days


#2 posted 354 days ago

nice jig—thanks

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --

View lumberjoe's profile

lumberjoe

2829 posts in 854 days


#3 posted 354 days ago

Where have you been??? The internet needs you! You make some really awesome and indigenous stuff – from the natural materials furniture to awesome jigs. keep it going!

-- www.etsy.com/shop/KandJWoodCrafts

View luv2learn's profile

luv2learn

1649 posts in 908 days


#4 posted 354 days ago

A man can never have too many jigs and this one is a dandy. Thanks for the post and video.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View Izzy Swan's profile

Izzy Swan

146 posts in 359 days


#5 posted 353 days ago

Thanks guys, I didnt demenstrate in use in the video and should have.. sorry about that.. Will show it in action in next video post. Thanks again.

-- Izzy Swan - A Creative Thinkers approach to Woodworking

View stefang's profile

stefang

12611 posts in 1940 days


#6 posted 353 days ago

Another great jig Izzy. You are boiling over with creativity and I think it is wonderful that you are sharing it with other woodworkers.

-- Mike, an American living in Norway.

View OakHill's profile

OakHill

277 posts in 400 days


#7 posted 353 days ago

Very nice jig. I’ll be watching for the next video on it. Thanks.

-- John, Illinois, http://OakHillWoodCreations.com

View littlecope's profile

littlecope

2889 posts in 2107 days


#8 posted 353 days ago

Few Woodworkers have arrived on LJ’s with the impact you have my Friend…
Great Work, Nifty Jigs, and I get the feeling you’re just warming up; probably have more than one bag of tricks!
Good for You! (And really good for all of us!)
Keep ‘em coming!! :)

-- Mike in Concord, NH---Unpleasant tasks are simply worthy challenges to improve skills.

View Izzy Swan's profile

Izzy Swan

146 posts in 359 days


#9 posted 353 days ago

Thanks littlecope, I really hope to learn from and share my experiance with others intersted in woodworking.

-- Izzy Swan - A Creative Thinkers approach to Woodworking

View Izzy Swan's profile

Izzy Swan

146 posts in 359 days


#10 posted 353 days ago

Here is an update video show the circle cutting jig in action..
https://www.youtube.com/watch?v=nrw0YHjSgFc&feature=youtube_gdata_player

-- Izzy Swan - A Creative Thinkers approach to Woodworking

View redryder's profile

redryder

2113 posts in 1707 days


#11 posted 351 days ago

This is a jig I need. I watched both videos. I like your style of keeping them short and to the point.
I’m not sure I understand how a 1/4” screw attached to the larger knob screwed down keeps the runner from moving….......................

-- mike...............

View Roger's profile

Roger

14177 posts in 1409 days


#12 posted 351 days ago

Izzy, you are a jig mujiction! :)

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View CFrye's profile

CFrye

2590 posts in 445 days


#13 posted 351 days ago

@ redryder—the 1/4” screw attached to the larger knob screwed down acts as a set screw to lock the slider in place in the dovetail slot is how I understand it.

-- God bless, Candy

View Izzy Swan's profile

Izzy Swan

146 posts in 359 days


#14 posted 351 days ago

Ya.. what Candy said.. lol

-- Izzy Swan - A Creative Thinkers approach to Woodworking

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase