|Project by Mrmyke||posted 07-29-2013 11:47 PM||1130 views||1 time favorited||3 comments|
This is first piece of furniture I’ve made to date. Used pine to keep the cost down. The table is 38” tall 18” deep and 59” wide. Used a red oak stain, then 3 coats of lacquer with wet sanding between the first 2. Used 600 grit sand paper. On final coat I sanded with a 2000grit paper. Once all sealed I used square nails as detail. Non skid pads on the feet of the table. The top was all butt joints, the frame was all mortise/tenon.
Thanks for checkin it out