LumberJocks

Antler shelf with live edge

  • Advertise with us
Project by Mike posted 367 days ago 1142 views 4 times favorited 3 comments Add to Favorites Watch

This shelf is made of black walnut with a live edge. It’s attaches to the wall using screws in the wall and a key hole slot on the back edge of the shelf. The antlers are epoxied on the bottom and only give the allusion of holding the shelf up. I used a lacquer finish on the wood and a spary acrylic finish on the antlers to protect them.

Instillation was a little tricky because the screws needed to be screwed in enough to hold the shelf tight to the wall.





3 comments so far

View 54curly's profile

54curly

25 posts in 399 days


#1 posted 367 days ago

A very creative idea and it turned out nice also!!!

-- Curly, South Dakota! Now where did I put that board stretcher?

View steliart's profile

steliart

1807 posts in 1292 days


#2 posted 366 days ago

Very cool project !!!

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --

View Fishinbo's profile

Fishinbo

11216 posts in 780 days


#3 posted 364 days ago

Like it. Beautiful and cool combination of the wood and antlers. Great work!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase