Wood Cart

  • Advertise with us
Project by Jason W. Fudge posted 07-23-2013 08:06 AM 1917 views 3 times favorited 4 comments Add to Favorites Watch

This is the wood cart I built to store wood in my shop (or garage as the wife calls it). All the wood for the cart was given to me from my buddy Wade when he left town.

The SketchUp plans:

4 comments so far

View BarbS's profile


2434 posts in 3503 days

#1 posted 07-24-2013 02:41 AM

I like the horizontal, vertical and slope idea. I’ll bet within a few months you have that thing so full you find it hard to move it! It makes a very nice storage unit.


View workerinwood's profile


2716 posts in 2485 days

#2 posted 07-24-2013 01:09 PM

Great job! Never enough space for storing material.

-- Jack, Albuquerque

View Fishinbo's profile


11362 posts in 1593 days

#3 posted 07-25-2013 04:46 PM

Like it, great and convenient way to store and organize different sizes of wood cuts. Well done!

View Jason W. Fudge's profile

Jason W. Fudge

35 posts in 1201 days

#4 posted 07-25-2013 07:03 PM

I got the idea from Randy but I modded it to be able to use the scrap wood I had on hand. The angled section is nice because it allows the storage of large plywood sheets without having them to worry about falling over when I move the thing around. Designing it in SketcUp allowed me to make sure wood would fit properly. The angle it is at is specifically a design feature. It is angled just right to allow a 4×8 sheet of plywood stand vertically on it with long pieces of wood (1×3x8s for example) on the other side. because of the specific angle, they do not touch each other.

Eventually, and probably soon, it will be filled with more hardwoods than 2×4’s.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics