Things got a little jiggy this week

  • Advertise with us
Project by Woodmaster1 posted 07-19-2013 08:34 PM 2232 views 6 times favorited 9 comments Add to Favorites Watch

This week I made a finger box jig, tenon jig, miter sled and a aux. fence for dadoing. The finger jig will cut 1/4, 3/8, 1/2, and 3/4 fingers. The sample shown was the first try and it was dead on.

9 comments so far

View JohnNIC's profile


11 posts in 864 days

#1 posted 07-19-2013 08:45 PM


-- John - Woodworkers Drill IT deeper

View kdc68's profile (online now)


2394 posts in 1367 days

#2 posted 07-19-2013 10:09 PM

I may have to “borrow” your miter sled idea…thanks for sharing

-- Measure "at least" twice and cut once

View steliart's profile


1817 posts in 1778 days

#3 posted 07-20-2013 01:36 AM

no woodworking without them

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - --

View Tim Roman's profile

Tim Roman

21 posts in 878 days

#4 posted 07-20-2013 05:58 AM

I currently have an 18-year old Craftsman benchtop table saw with non-standard miter slots. Once I get my new table saw I’m sure I’ll go crazy making all the jigs I’ve been thinking about for some time now. Thanks for the inspiration!

-- Tim, Glen Burnie, Maryland

View Mike's profile


139 posts in 1131 days

#5 posted 07-20-2013 12:07 PM

I like your miter sled. I might modify mine a little now. Looks like you can cut about any length stock you need t.

-- A person of integrity never speaks of it...he walks in it...

View gfadvm's profile


13944 posts in 1780 days

#6 posted 07-20-2013 02:10 PM

A nice set of well built and useful jigs.

I have studied your box joint jig and can’t figure out how you adjust it for different width fingers/slots?

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View Woodmaster1's profile


663 posts in 1677 days

#7 posted 07-20-2013 03:31 PM

I made different plates for each size that is attached to the bottom with screws. The back plate in the middle is also removable to match the size being cut.

View gfadvm's profile


13944 posts in 1780 days

#8 posted 07-20-2013 07:54 PM

Thanks for the explanation.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View aussiedave's profile


3109 posts in 914 days

#9 posted 07-20-2013 10:21 PM

Man you did get busy over the weekend..some great looking jigs.

-- Dave.......If at first you don’t succeed redefine success....

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics