|Project by Blackie_||posted 07-16-2013 11:11 PM||1575 views||9 times favorited||17 comments|
Pictured OK this is my very first Beer Mug made on a bandsaw, thanks to Monte and Tony for their help and demonstration on how to do this.
This mug was a special order and the customer wanted the logos on the sides of the mug, I used my colwood burner machine to make the logos.
Build I first viewed Tony’s video but instead of gluing blocks together I used the limb of a walnut tree and used the same process for making the mug. The handle was made from the round plug that I cut out of the center of the mug, by using my log jig, I secured the round plug via screws and cut a 1” width slice from the center of the plug thus eliminating waste, also instead of making the handle fit the round exterior of the mug I made a flat area on the mug it’s self with my 4” belt sander the handle mated perfect to the mug. The inside was finished in a two part 30 min epoxy from great planes.
It measures 5 3/4” x 3 1/2”
Thanks for looking and comments are always enjoyed.
-- Randy - If I'm not on LJ's then I'm making Saw Dust. Please feel free to visit my store location at http://www.facebook.com/randy.blackstock.custom.wood.designs