LumberJocks

Miniature 2up2down winged box

  • Advertise with us
Project by Bob Collins posted 07-15-2013 06:02 AM 1016 views 0 times favorited 7 comments Add to Favorites Watch

After quite a few attempts I think I have produced a 2×2 winged box good enough to post. To much fiddling around with these little blighters so it is back to normal turning for me but has been a lot of fun.
Pic 2 shows the three different type of winged boxes
Pic 6 shows the results of many attempts. Advantage is if there is an accident with the wings is hopefully there are four wings left to play with.
I will post the other three in the next post.

-- Bob C, Australia. Your best teacher is your last mistake.





7 comments so far

View aussiedave's profile

aussiedave

3114 posts in 1606 days


#1 posted 07-15-2013 09:50 AM

Hey Bob…looks like you have pretty much mastered the winged boxes….looking good.

-- Dave.......If at first you don’t succeed redefine success....

View Ronald G Campbell 's profile

Ronald G Campbell

948 posts in 1786 days


#2 posted 07-15-2013 10:40 AM

Looks good. I have done many winged pieces and they are a challenge and fun. The results are great
Ron

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

View Jim Jakosh's profile

Jim Jakosh

19299 posts in 2887 days


#3 posted 07-15-2013 02:40 PM

Great turnings, Bob!!!!!!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View peteg's profile

peteg

4146 posts in 2605 days


#4 posted 07-15-2013 09:36 PM

Sure got some variations here Bob, well done these can be tricky
Pete

-- Pete G: If you always do what you always did you'll always get what you always got

View captbbrooks's profile

captbbrooks

174 posts in 2473 days


#5 posted 07-16-2013 01:03 AM

Great job. What did you use to make the little indentations?

-- Brian Brooks, Maine

View Bob Collins's profile

Bob Collins

2452 posts in 3466 days


#6 posted 07-16-2013 01:33 AM

Brian, I use the dremel and a small metal burr, found the burr gives a better cut using the side. Time consuming but I prefer this to sanding the wings on the lathe, even these little buggers sting the fingers. G’day Pete. finally got the mini 2 and 2 now I can get a life. Your right Ron they are a challenge and fun to turn. Dave, I don’t think they will be mastered, well not by me. Thanks for the comments.

-- Bob C, Australia. Your best teacher is your last mistake.

View Craig Havran's profile

Craig Havran

346 posts in 2393 days


#7 posted 07-17-2013 06:09 PM

Nice work, Bob. Keep em comin’!

-- "There's plenty of time to read the instruction manual when you're laying in the hospital bed". - Dad

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com